What will CA do to epoxy putty and/or squadron solvent based putty? Can I use it to create a smoother surface? Is there something else that might work for a hard, smooth surface?
Cheers.
CA on Putty
Moderators: DasPhule, Moderators
CA on Putty
Frantic and frenzied.
-
TER-OR
- Site Admin
- Posts: 10531
- Joined: Thu Jul 11, 2002 7:05 pm
- Location: Conjugate imprecision of time negates absolute determination of location.
- Contact:
CA should be fine on both. If you're interested in getting the glassy smooth result from epoxy putty from the start, read thru the posts about Aves.
I like to cover the model with Gunze Sangyo Mr. Surfacer 1000 from the rattlecan if it's resin or uses a lot of different components. That stuff snugs down to the surface, and cures glossy smooth. It can be buffed with a wet-polishing pad if you need.
I like to cover the model with Gunze Sangyo Mr. Surfacer 1000 from the rattlecan if it's resin or uses a lot of different components. That stuff snugs down to the surface, and cures glossy smooth. It can be buffed with a wet-polishing pad if you need.
Raised by wolves, tamed by nuns, padded for your protection.
Terry Miesle
Never trust anyone who says they don't have a hobby.
Quando Omni Flunkus Moratati
Terry Miesle
Never trust anyone who says they don't have a hobby.
Quando Omni Flunkus Moratati