Illuminating very, very, small Ghost from Shapeways

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
Lo pan
Posts: 471
Joined: Fri Jul 12, 2002 12:33 pm
Location: Washington D.C.
Contact:

Illuminating very, very, small Ghost from Shapeways

Post by Lo pan »

I've been collecting a fleet of 1/2256 Star Wars ships, and my most recent acquisition is an insanely small Ghost. I had no intention of illuminating the mini, but since it was printed in a fairly transparent medium I thought it might be worth a shot. I tried running a single fiber optic strand through a small brass tube, but it doesn't seem to work.

I'd really welcome any suggestions. Try to find a tiny LED? A special light/fiber configuration?

Along with the Ghost, from Shapeways, I also have a hollow MC-30 (via Nicholas Sagan) that will get a much easier treatment. Was hoping I could do both at the same time. TIA.
Lo-Pan
http://cinema-fictions.blogspot.com/
"Baah weep graahnaaah weep ninnybong!"
EVApodman
Posts: 4540
Joined: Sat Sep 30, 2006 8:37 am

Re: Illuminating very, very, small Ghost from Shapeways

Post by EVApodman »

Is the entire ship illuminated?

Fiber optics can illuminate but the light is very small and directional. It works best with windows and such

An SMD LED might work but the light is also very directional. You will have to wire it to a battery, a 1.5 button cell should be fine and would eliminate the need of a limiting resistor.

I don't know the type of clip that would hold this kind of battery and the wiring for this kind of LED requires good soldering skill and the right tools.
"Nothing to do now but drink a beer and watch the universe die."
"Basically what I do everyday."

I AM Spartacus!
I'm Batman.

Don't believe everything you see on the Internet!- Abraham Lincoln

Oh my God!! It's full of plastic peanuts!

Today is a good day to model!
User avatar
Kylwell
Moderator
Posts: 29643
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Re: Illuminating very, very, small Ghost from Shapeways

Post by Kylwell »

This guy https://evandesigns.com/

and pico size LEDs. They'll pre-wire them.
Abolish Alliteration
User avatar
Ramsayman
Posts: 3298
Joined: Sun Jan 09, 2011 2:03 am
Location: Penticton, BC

Re: Illuminating very, very, small Ghost from Shapeways

Post by Ramsayman »

I once had a micro machines Defiant from DS9 that a friend wanted to be parked at his fiber optic DS9 station. I made a cast and molded it in clear, and put an LED at the "docking" port. The idea was to Paint the defiant scrape off the parts that were to glow, and leave the part that "plugs" into the station clear so the LED would light it up.
TShark
Posts: 82
Joined: Mon Oct 26, 2009 3:33 pm

Re: Illuminating very, very, small Ghost from Shapeways

Post by TShark »

The smallest LED's I have found were on HDA Modelworx.

http://hdamodelworx.com/5-PACK-0402-SMD ... p_103.html

They are very bright and HDA has been great to do business with.

Hope this helps
TShark
Lo pan
Posts: 471
Joined: Fri Jul 12, 2002 12:33 pm
Location: Washington D.C.
Contact:

Re: Illuminating very, very, small Ghost from Shapeways

Post by Lo pan »

Thanks, all, very much for the advice! I'll take a look and see what might work.

My 1/2256 fleet might be a pipe dream, but I'm gonna try to start small (Ghost), move up a bit (MC-30, thank you Nicholas Sagan), then go crazy (Anigrand ISD).
Lo-Pan
http://cinema-fictions.blogspot.com/
"Baah weep graahnaaah weep ninnybong!"
Post Reply