Possible LED source ?

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
marc111
Posts: 86
Joined: Wed Apr 26, 2006 8:50 pm
Location: Iowa

Possible LED source ?

Post by marc111 »

Has anyone bought from the LEDshoppe? Their prices seem to be good and I am considering using them for my E.

http://www.ledshoppe.com/led5mm.htm

Thanks,
Mark
jwrjr

Post by jwrjr »

I have not bought from them, but as you say, their prices look pretty good. But you may need to buy a large number of leds. This is not necessarily bad. But it must be considered in the decision.
Madman Lighting
Posts: 1816
Joined: Sat Mar 05, 2005 9:16 am
Location: Serenity.
Contact:

Post by Madman Lighting »

Be careful, these folks are in Hong Kong and I've found several very inexpensive Hong Kong LED vendors, all claiming to be the best. My normal LED vendor is in the US and sure, they're more expensive but I've had no trouble with them at all.

-John C.
That Madman Who Lit Up Deep Space Nine
Sparky
Moderator
Posts: 2404
Joined: Thu Jun 05, 2003 8:28 am
Location: Are we there yet? (Chicago)
Contact:

Post by Sparky »

As you can see none of the LEDs have a regular manufacture's spec sheets.

That means, current useage, voltage requirements, lifetime, and mostly color wavelegnths are all fuzzy. That means in a batch you may get visibly different colors and brightnesses.
<a href="http://www.kc6sye.com/2_wheresaneatpart.jpg" target="_Sparky">Is this plastic thingy on the counter a neat part?</a> <a href="http://www.kc6sye.com/1_casting_inprogress.jpg" target="_Sparky">Let's cast it.</a>
Madman Lighting
Posts: 1816
Joined: Sat Mar 05, 2005 9:16 am
Location: Serenity.
Contact:

Post by Madman Lighting »

You might want to add reliability to the list, these could be factory reject parts that do work, but maybe not for very long.

Always remember, you get what you pay for.

-John C.
That Madman Who Lit Up Deep Space Nine
fokkerpilot
Posts: 533
Joined: Sun Oct 20, 2002 11:10 pm
Location: Leesburg, VA, just to the west confusion DC
Contact:

Post by fokkerpilot »

Best to shy away from deals to good to be true. I bought from a "bulk" dealer [name withheld ] and had an overall 30% reject rate during bench tests. Just friendly advice.
Post Reply