CAN I USE SPEAKER WIRE TO LIGHT MODELS ?

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
User avatar
BERT aka MODEL MAKER
Posts: 876
Joined: Fri Nov 28, 2003 11:01 pm
Location: LAKE TAHOE, NEVADA

CAN I USE SPEAKER WIRE TO LIGHT MODELS ?

Post by BERT aka MODEL MAKER »

I have a big roll of speaker wire. it can be split down the middle and have 2 seperate insulated wires. Is this speaker wire any good for lighting models ?
BERT
MODEL MAKER
IF MY SIGNAL IS BLINKING, I AM NOT ASKING PERMISSION
Top
Sparky
Moderator
Posts: 2404
Joined: Thu Jun 05, 2003 8:28 am
Location: Are we there yet? (Chicago)
Contact:
Contact Sparky

Post by Sparky »

sure, it may be over sized for LEDs but fro larger draw items like fluroscent lighting it might be the right size (is it 18 AWG).
<a href="http://www.kc6sye.com/2_wheresaneatpart.jpg" target="_Sparky">Is this plastic thingy on the counter a neat part?</a> <a href="http://www.kc6sye.com/1_casting_inprogress.jpg" target="_Sparky">Let's cast it.</a>
Top
User avatar
BERT aka MODEL MAKER
Posts: 876
Joined: Fri Nov 28, 2003 11:01 pm
Location: LAKE TAHOE, NEVADA

Post by BERT aka MODEL MAKER »

I am not sure what gauge it is. I have the jupiter 2 led light circuits and want to extend the length of the switches so i can activate the fusion core and the top bubble dome light circuit from about 2 feet away. :D
BERT
MODEL MAKER
IF MY SIGNAL IS BLINKING, I AM NOT ASKING PERMISSION
Top
zaphod
Posts: 1541
Joined: Sat Jul 13, 2002 11:05 am
Location: Sacramento

Post by zaphod »

Dude, the more copper the better. I say go nuts. :thumbsup:
Never miss an opportunity to be a class act.
Top
Post Reply

Return to “Lighting & Electronics”