Whats the best fiber optic thickness for star destroyer

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
muir318
Posts: 24
Joined: Thu Feb 09, 2012 12:16 pm
Location: Sweden/Originally from scotland!

Whats the best fiber optic thickness for star destroyer

Post by muir318 »

Hello guys

Which is the best thickness of fiber optic to use to install on my star destroyer and republic star destroyer?

And can anyone recommend drill bit sizes and manufacturer?

Thanks in advance for all answers
Benjamin Arendt
Posts: 126
Joined: Thu Jul 01, 2010 9:09 am
Location: Switzerland

Post by Benjamin Arendt »

I have used 0,35mm from those funny lights.. works I think.

http://i1045.photobucket.com/albums/b45 ... M_3100.jpg

Also have used some 1mm for the main hangar.
User avatar
Tchail
Posts: 4330
Joined: Tue Mar 04, 2003 8:40 pm
Location: Nowhere in Particular

Post by Tchail »

You might also want to consider the LG64-25 cable from fiberopticproducts.com.

See the bottom of this page:

http://www.fiberopticproducts.com/Jacketed.htm

A good place for drill bits is Widget Supply:

http://www.widgetsupply.com/

They have a good selection of drill bits at a reasonable price.

I'd also definitely recommend picking up a pin vice.

Best,

-Tchail
“In the beginning the universe was created. This made a lot of people angry, and has generally been regarded as a bad move." Episode 5, The Hitchhiker's Guide to the Galaxy
rayra
Posts: 269
Joined: Sun Feb 02, 2003 3:40 am
Location: Los Angeles

Post by rayra »

pin vice works great and is a must have for this kind of work, but man will your hands get tired using it, drilling a few hundred holes.

Next time I do a large lighting project I'm going to see about chucking the bits in the wand extension of my dremel. Maybe with low speed I won't break many bits and it will be worth it to be able to drill a bunch in a jiffy.

http://img.photobucket.com/albums/v95/r ... ile400.jpg
Signature Intentionally Left Blank
Madman Lighting
Posts: 1815
Joined: Sat Mar 05, 2005 9:16 am
Location: Serenity.
Contact:

Post by Madman Lighting »

I used a mix of 0.25mm and 0.5mm diameter, with a #80 drill for the small fibers and a bigger one (I forget) for the 0.5mm diameter.
That Madman Who Lit Up Deep Space Nine
User avatar
Captain Riker
Posts: 1638
Joined: Fri Feb 06, 2009 12:09 pm
Location: New Jersey

Post by Captain Riker »

I'm guessing a .26mm drill bit is big enough for .25mm fiber? I assume the holes should be the same size or just slightly larger than the fiber itself.
User avatar
Captain Riker
Posts: 1638
Joined: Fri Feb 06, 2009 12:09 pm
Location: New Jersey

Post by Captain Riker »

Wow. Math fail. I was searching for something on drill bits and found this post. Sigh.
Post Reply