Flexiable Light Strip

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
User avatar
starmanmm
Posts: 2503
Joined: Sat Jul 13, 2002 12:59 am
Location: New Bedford, MA

Flexiable Light Strip

Post by starmanmm » Fri May 26, 2017 11:56 am

With this reel....

https://www.amazon.com/Flexible-Non-wat ... s=smd+5050

can I cut them up into strips of 3 smds and use them in a model without any problems?

If not, what would you recommend?
"Things fall apart... It's Scientific" Talking Heads

User avatar
zysurge
Posts: 1018
Joined: Mon May 24, 2004 2:49 pm
Location: Connecticut
Contact:

Re: Flexiable Light Strip

Post by zysurge » Fri May 26, 2017 12:27 pm

Yes. Just make sure to only cut it where indicated.

Then individual strips inside the model can be connected in series using thin wire. I did exactly this for under cabinet lighting in my kitchen. I ran wires to bridge things like the stove and sink and make one continuous strip throughout the entire kitchen.

If you want to use leftover in another model, you'd need a separate power supply.

User avatar
starmanmm
Posts: 2503
Joined: Sat Jul 13, 2002 12:59 am
Location: New Bedford, MA

Re: Flexiable Light Strip

Post by starmanmm » Fri May 26, 2017 12:36 pm

Ok... my guess is that with any reel like this that I can do this.
"Things fall apart... It's Scientific" Talking Heads

User avatar
Kylwell
Moderator
Posts: 28827
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Re: Flexiable Light Strip

Post by Kylwell » Fri May 26, 2017 1:53 pm

Pretty much. I think that's the exact reel I picked up for mine.
Abolish Alliteration

User avatar
TurkeyVolumeGuessingMan
Posts: 2178
Joined: Fri Aug 10, 2012 6:31 pm
Location: Gunma-ken, Japan
Contact:

Re: Flexiable Light Strip

Post by TurkeyVolumeGuessingMan » Sun May 28, 2017 10:18 pm

starmanmm wrote:
Fri May 26, 2017 12:36 pm
Ok... my guess is that with any reel like this that I can do this.
What's more, the resistors are built into this LED tape, so it makes lighting easier. I'm currently getting my feet wet in model lighting and it is pretty fun.
Greg
Plastic modeling and other nerd stuff in Japan on my YouTube channel
My WIP modeling page on Tumblr.
We're gonna stab your daughter at the mall. Ah aaah aaah! We're gonna stab your wife, your son. Oooooh!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests