looking for circut simulators

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
User avatar
chiver
Posts: 645
Joined: Wed Feb 08, 2012 5:25 pm
Location: Trenton

looking for circut simulators

Post by chiver »

i am looking for any kind of computer program that can simulate a circut. so i can see how fast a light will flash or how fast a chaser circut will be before i build it
KEEP CALM AND CHIVE ON!!!
User avatar
chiver
Posts: 645
Joined: Wed Feb 08, 2012 5:25 pm
Location: Trenton

Post by chiver »

For example something similar to this

http://m.youtube.com/watch?v=21jLnp3z9lg
KEEP CALM AND CHIVE ON!!!
User avatar
Joseph Osborn
Posts: 1323
Joined: Thu Oct 06, 2005 9:22 pm
Location: Alabamastan
Contact:

Post by Joseph Osborn »

use Google to search for circuit simulator software.
Madman Lighting
Posts: 1816
Joined: Sat Mar 05, 2005 9:16 am
Location: Serenity.
Contact:

Post by Madman Lighting »

What you want is SPICE, a circuit simulator programming tool.

A free version is called LTSpice, from Linear Technology (www.linear.com)

You will have to know basic electrical engineering to use it, which means to do what you want, you will have had to understand about junior level EE coursework in college.

Good luck!
That Madman Who Lit Up Deep Space Nine
User avatar
chiver
Posts: 645
Joined: Wed Feb 08, 2012 5:25 pm
Location: Trenton

Post by chiver »

I can Make simple circuits, and flasher circuits with a 555. I want to try to make a chaser on it but want to be able to make it on the computer and play with the R values to change and figure out the flash rate I want
KEEP CALM AND CHIVE ON!!!
Madman Lighting
Posts: 1816
Joined: Sat Mar 05, 2005 9:16 am
Location: Serenity.
Contact:

Post by Madman Lighting »

If you know enough to build the circuit, you should be able to simulate it in LTSpice. It has a 555 model in the built-in libraries.
That Madman Who Lit Up Deep Space Nine
texastony1946
Posts: 7
Joined: Sun May 26, 2013 8:47 pm

Post by texastony1946 »

I use YENKA, it allows you to build and test circuits. I have used it to test
555 circuits for LED lighting. The test instruments work very well, especially
the O scope. I have now started using Arduino for my lighting. You can
make all kinds of LED circuits by just programming. They are really cheap,
about 2.50 and under.
Post Reply