Using foil for light blocking

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
giggsy
Posts: 41
Joined: Fri Jan 04, 2013 11:33 am

Using foil for light blocking

Post by giggsy »

I'm considering methods of light blocking for my 1/350 Enterprise model.
It's the first time I am lighting a model.

I was considering using foil on the interior but it doesn't appear to be a common method.

Is there an issue using foil over multiple layers of primer/paint?

Thanks
Styrofoam_Guy
Posts: 638
Joined: Wed Oct 12, 2005 1:58 pm
Location: Toronto Canada
Contact:

Post by Styrofoam_Guy »

I used Krylon fusion black paint on the inside of my TOS 1:350 but it does not appear to be enough as the LEDs that come in the light kit are very bright.

I will be painting the exterior and hopefully that will help but I am placing aluminum foil where I can to help block/reflect the light.

I have already installed the windows so I will I will do what I can with the foil. I have a second kit where I will put the foil down before I put the windows in.

I am using hot glue to hold the foil down and it seems to work OK.
giggsy
Posts: 41
Joined: Fri Jan 04, 2013 11:33 am

Post by giggsy »

Thanks.

Going to give it a go with some Reynolds heavy duty foil and CA glue.
Once covered, give it a coat of white primer.
NNYGamer
Posts: 2198
Joined: Sun Nov 06, 2005 11:38 pm
Location: Northernmost NY (aka Massena)
Contact:

Post by NNYGamer »

I've seen people use aluminum duct tape to block light. Then cut out areas for a raytheon effect.
I have no signature.
User avatar
iamjafi
Posts: 77
Joined: Sat May 23, 2009 8:30 pm
Location: Los Angeles, CA

Post by iamjafi »

I use aluminum foil tape for light blocking and reflection. Here's an example:
https://picasaweb.google.com/lh/photo/2 ... directlink
It's great stuff!
User avatar
Neb
Posts: 6526
Joined: Mon Jul 15, 2002 3:32 pm
Location: Up to my ass in unbuilt kits....

Post by Neb »

Go to the HVAC dept at Lowes or Home Depot-----pick up a roll of aluminum adhesive duct tape 2 inches wide, great adhesive, cuts easily, and very reflective. Works great on my TOS Enterprise. I also burnish it down after it's applied---goes over irregular surfaces well if it burnished.

It's about $9 a roll, but it lasts forever. :)
George Seletas
Contest Chief
Amazing Model Contest
www.wonderfest.com
gseletas@wonderfest.com
giggsy
Posts: 41
Joined: Fri Jan 04, 2013 11:33 am

Post by giggsy »

Thanks for the replies.

Ended up using a combination of heavy Kitchen foil and foil tape.
The foil tape seemed a bit heavy compard to the foil + ca glue.

Also the kitchen foil conformed more.

Only prob was the amount of time it took and the prob of getting ca glue on my fingers.

But finally got t done and with a coat of white primer, the result is very satisfactory,
Sft2
Posts: 124
Joined: Thu Jan 17, 2013 6:02 pm
Location: Spring, Texas, United States, Terra, Sol System

Post by Sft2 »

I've been having good luck with this stuff:

http://www.papilio.com/inkjet%20silver% ... 0film.html

Cut to fit, peel off the backing, and stick it in there. It's not just shiny, it's a mirror.
Steve

There's something unwholesome about a kit that has only 11 pieces, but 89 decals covering 90% of the surface.
User avatar
Disillusionist
Posts: 1134
Joined: Wed Apr 09, 2003 10:11 pm
Location: Closer than you think

Post by Disillusionist »

If you opt to use foil, just make sure you do a good job insulating all your electrical connections on your LED's and such. Wouldn't want that conductive foil shorting anything out!
Affordable laser cutting and engraving for the hobby community

www.laserfirecreations.com While you're at it, follow us on Facebook
User avatar
Neb
Posts: 6526
Joined: Mon Jul 15, 2002 3:32 pm
Location: Up to my ass in unbuilt kits....

Post by Neb »

Disillusionist wrote:If you opt to use foil, just make sure you do a good job insulating all your electrical connections on your LED's and such. Wouldn't want that conductive foil shorting anything out!
:shock:

:D
George Seletas
Contest Chief
Amazing Model Contest
www.wonderfest.com
gseletas@wonderfest.com
Post Reply