Advice on Lighting Kits

Ask and answer questions, share tips and resources for installing lighting and other electronics in your models.

Moderators: Sparky, Moderators

Post Reply
roughy
Posts: 4
Joined: Sat Jun 10, 2017 2:01 am
Location: Hobart, Tasmania

Advice on Lighting Kits

Post by roughy » Thu Jun 15, 2017 6:19 pm

Hi all
Intend to do my first lit kit by the end of the year. Any advice on lighting kits would be appreciated.
I have come across three makers: Tenacontrols, Galactic Modeler and Trek Modeler.

I'm not terribly knowledgeable when it comes to electronics.
Cheers
Mark

slookabill
Posts: 9
Joined: Mon May 22, 2017 7:39 pm

Re: Advice on Lighting Kits

Post by slookabill » Thu Jun 15, 2017 7:11 pm

Which kit are you thinking of lighting? Another manufacturer is Big Easy Lighting Solutions

roughy
Posts: 4
Joined: Sat Jun 10, 2017 2:01 am
Location: Hobart, Tasmania

Re: Advice on Lighting Kits

Post by roughy » Thu Jun 15, 2017 7:18 pm

The 1:600 Revell Enterprise. Because it isn't an accurate kit I'm happy for it to be an experiment. And it is big enough for my clumsy fingers.

rborrazas
Posts: 1
Joined: Thu Jun 15, 2017 9:58 pm

Re: Advice on Lighting Kits

Post by rborrazas » Thu Jun 15, 2017 10:01 pm

Also check out some of the excellent work that Stan is doing out on Starling Tech


Sent from my iPad using Tapatalk

Tracy White
Posts: 217
Joined: Thu Sep 26, 2013 10:21 am
Location: IT
Contact:

Re: Advice on Lighting Kits

Post by Tracy White » Sat Jun 17, 2017 10:02 am

There's also Madman Lighting or rolling your own with a microprossessor like an Arduino.
Tracy White
Researcher@Large

User avatar
TurkeyVolumeGuessingMan
Posts: 2049
Joined: Fri Aug 10, 2012 6:31 pm
Location: Gunma-ken, Japan
Contact:

Re: Advice on Lighting Kits

Post by TurkeyVolumeGuessingMan » Sun Jun 18, 2017 6:56 pm

Tracy White wrote:
Sat Jun 17, 2017 10:02 am
There's also Madman Lighting or rolling your own with a microprossessor like an Arduino.
I have no background in electronics, but I was able to finish my lighted Revell Cylon Raider last night. In order to tackle an Enterprise, I am going to forgo an expensive Arduino and use a 556 timing chip instead. There is a guide online to do the Enterprise's running lights and nav strobes here:
http://virtualight.com/?p=1199

Tracy White
Posts: 217
Joined: Thu Sep 26, 2013 10:21 am
Location: IT
Contact:

Re: Advice on Lighting Kits

Post by Tracy White » Sun Jun 18, 2017 10:24 pm

$7 is expensive? How about less that $2? $3 with wireless?

I don't use the Chinese clones myself but some people seem OK with them.
Tracy White
Researcher@Large

User avatar
TurkeyVolumeGuessingMan
Posts: 2049
Joined: Fri Aug 10, 2012 6:31 pm
Location: Gunma-ken, Japan
Contact:

Re: Advice on Lighting Kits

Post by TurkeyVolumeGuessingMan » Sun Jun 18, 2017 10:54 pm

Tracy White wrote:
Sun Jun 18, 2017 10:24 pm
$7 is expensive?
I'll have to admit my ignorance about Arduinos. I saw one for four times that price, or at least whatever it was I believed it to be an Arduino. Perhaps it was pre-programmed or something. I should look up some tutorials on how to use them. I do know that they are good for more than mere flashing lights. A part of me wants to tackle learning how to wire up a 556 timing chip though.

User avatar
tetsujin
Posts: 2166
Joined: Mon Feb 28, 2005 6:08 pm
Contact:

Re: Advice on Lighting Kits

Post by tetsujin » Mon Jun 19, 2017 11:56 am

TurkeyVolumeGuessingMan wrote:
Sun Jun 18, 2017 10:54 pm
Tracy White wrote:
Sun Jun 18, 2017 10:24 pm
$7 is expensive?
I'll have to admit my ignorance about Arduinos. I saw one for four times that price, or at least whatever it was I believed it to be an Arduino. Perhaps it was pre-programmed or something. I should look up some tutorials on how to use them. I do know that they are good for more than mere flashing lights. A part of me wants to tackle learning how to wire up a 556 timing chip though.
I think it's generally worth learning things when the motivation is there... But unless you are specifically interested in studying 1970s/1980s-era electronics hobbyist projects, collecting (awesome, classic) Forrest Mims books and all that, I think you're better served in this case by learning microcontrollers instead.

A 555-based circuit is a relatively easy way to get some basic time-varying effects going, and they're absolutely dirt cheap, but for really simple jobs microcontrollers are just about as cheap, and probably as small as the 555 circuit. As the behavior you're trying to achieve gets more complex, the complexity of a discrete logic/analog circuit to achieve that behavior gets much more complex and larger, and if you get something wrong it means redesigning or rebuilding part of the circuit to change the behavior. With a microcontroller you can just hook up a cable and reprogram the thing.
---GEC (三面図流の初段)
There are no rats.
The skulls eat them.

User avatar
Kylwell
Moderator
Posts: 28719
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Re: Advice on Lighting Kits

Post by Kylwell » Mon Jun 19, 2017 12:02 pm

Abolish Alliteration

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests