Tamiya acrylics and using a gloss coat

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
nanook177
Posts: 162
Joined: Sat Sep 02, 2006 12:52 pm

Tamiya acrylics and using a gloss coat

Post by nanook177 » Mon Jun 05, 2017 9:47 pm

Ok, I'm building my second 1/1000 Refit, using Tamiya Acrylics. My first one I using a gloss coat to provide a smooth surface and the results were... catastrophic. It practically washed away the paint. Any advice on trying this again or just don't this time? I'm building this as a gift and I'm trying to make this as good as possible and want to learn from my mistakes. Thank you!

Sent from my SM-N900V using Tapatalk


User avatar
Kylwell
Moderator
Posts: 28896
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Re: Tamiya acrylics and using a gloss coat

Post by Kylwell » Mon Jun 05, 2017 11:09 pm

I've used Alclad II gloss & matte coats on Tamiya, Testor's acrylic clear coats, and good old Future/Pledge Floor Care Mutli-surface without any issues. What clear coat where you using and how did you apply it?
Abolish Alliteration

wowyz
Posts: 131
Joined: Mon May 29, 2017 2:17 am

Re: Tamiya acrylics and using a gloss coat

Post by wowyz » Tue Jun 06, 2017 12:08 am

Tamiya makes matte, semigloss and gloss topcoats when in doubt.

General rule avoid hot coats( top, paint) over less volatile ones and always give a few days to let current coat/ paint dry 100%.

User avatar
dizzyfugu
Posts: 401
Joined: Fri Oct 23, 2009 7:14 am
Location: Right behind you!
Contact:

Re: Tamiya acrylics and using a gloss coat

Post by dizzyfugu » Wed Jun 07, 2017 9:22 am

From the symptoms it sounds to me as if the Tamiya paint coat rather bears the problem, not the top varnish coat? From my experience with Tamiya acrylics, they proved to be very robust. Once dry, they are hard to "impress" by any kind of varnish (either acrylic or solvent-based). Did the paint flake off, or did it crumble under the varnish? To me it appears as if the Tamiya paint did not bond well with the underground, and was then "washed away" by the varnish on top?
DizzyFugu - Reporting from Germany
http://www.flickr.com/dizzyfugu

User avatar
southwestforests
Posts: 1692
Joined: Sun Oct 24, 2010 3:09 pm
Location: Right smack in middle of Missouri

Re: Tamiya acrylics and using a gloss coat

Post by southwestforests » Thu Sep 21, 2017 2:19 am

Wow man, 3 months later and no reply at all from OP. Being a big user of Tamiya paints I am interested in this.
"There are a thousand things that can happen when you go light a rocket engine, and only one of them is good."
Tom Mueller of SpaceX, in Air and Space, Jan. 2011

User avatar
Lt. Z0mBe
Posts: 7233
Joined: Thu May 29, 2003 1:46 pm
Location: Balltown Kentucky, by God!
Contact:

Re: Tamiya acrylics and using a gloss coat

Post by Lt. Z0mBe » Thu Sep 21, 2017 10:39 am

Sounds like the OP used a rattlecan lacquer like Testor's Dullcote or somesuch. That's the most likely candidate for washing away acrylic. That, or it was something with a ridiculous amount of alcohol and was soaked on instead of misted.

Kenny

www.sigmalabsinc.com


Onward, proud eagle, to thee the cloud must yield.

User avatar
darthviper107
Posts: 562
Joined: Wed May 18, 2011 12:54 pm

Re: Tamiya acrylics and using a gloss coat

Post by darthviper107 » Wed Sep 27, 2017 2:29 pm

Used the Tamiya semi-gloss spray recently, it turned out really well and polished quite nicely using Novus plastic polish.

nanook177
Posts: 162
Joined: Sat Sep 02, 2006 12:52 pm

Re: Tamiya acrylics and using a gloss coat

Post by nanook177 » Mon Dec 11, 2017 7:16 pm

Hello again. I did solve the problem. I did use a Lacquer gloss unintentionally. I nearly did the same thing again trying to use Tamiya pearl Lacquer on another refit. Thanks for all the help to all here.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests