Spray can to airbrush?

This is the place to get answers about painting, weathering and other aspects of finishing a model.

Moderators: DasPhule, Moderators

Post Reply
User avatar
Halcyon083
Posts: 545
Joined: Tue Jul 21, 2009 8:16 pm
Location: Ft. Worth, Tx
Contact:

Spray can to airbrush?

Post by Halcyon083 »

I have a color in a spray can, Tamiya Insignia white, that only comes in a spray can. Is there a way to get the paint out of the can so I can use it in my airbrush?
"Justice has a name, and the name that it has, besides Justice, is Captain Hammer."
User avatar
duck
Posts: 1999
Joined: Fri Jul 12, 2002 5:59 pm
Location: There are alot of deer here...

Post by duck »

It is called decanting. Spray the paint into a jar, let it degas and you should be good to airbrush!
Burn your dead.
User avatar
Halcyon083
Posts: 545
Joined: Tue Jul 21, 2009 8:16 pm
Location: Ft. Worth, Tx
Contact:

Post by Halcyon083 »

duck wrote:It is called decanting. Spray the paint into a jar, let it degas and you should be good to airbrush!
Cool, do I still need to thin it?
"Justice has a name, and the name that it has, besides Justice, is Captain Hammer."
User avatar
Ziz
Posts: 9374
Joined: Fri Jul 12, 2002 9:24 pm
Location: Long Island, NY
Contact:

Post by Ziz »

Depends on the paint. See how it flows after it's out.
Modular
Models

Build your fleet
YOUR way.

http://www.modular-models.com
----------------------------------------------------------
"I know you think you understand what you thought I said, but I'm not sure you realize that what you heard is not what I meant." - Alan Greenspan
____________________________________
"The customer that spends the least complains the most."
User avatar
Pat Amaral
Posts: 3730
Joined: Fri Jul 12, 2002 2:44 pm
Location: Ok, I'm here. You can start now

Post by Pat Amaral »

Small warning.

Decanting a "spray bomb" into a jar for airbrushing isn't necessarily a straight
forward process (unless you don't mind making a HUGE mess). The propellant
in the can is dissolved into the paint. This is what allows for the atomization of
the paint when you press the nozzle down. If you're not careful, you will get
paint everywhere except in the jar.

I suggest taking a look at the numerous tutorials out there before attempting
this. Google is your friend. Searching on "decanting paint from a spray can"
turns up a bunch of good info on the subject.

Hope that helps,
Pat A.
=============================
50% Nerd, 50% Geek, 100% Cool
User avatar
Halcyon083
Posts: 545
Joined: Tue Jul 21, 2009 8:16 pm
Location: Ft. Worth, Tx
Contact:

Post by Halcyon083 »

Thanks a lot guys! Pat, I will do just that!
"Justice has a name, and the name that it has, besides Justice, is Captain Hammer."
nurturer
Posts: 454
Joined: Fri Jul 12, 2002 4:07 pm

Post by nurturer »

I've done it with Tamiya Semi Gloss Black. Wear rubber gloves and find an open backyard because it can get messy. Aim the nozzle pointing down toward the side of the interior of the jar, not directly at the bottom, so as to avoid the 'Vesuvius Effect'. And go slow. After you have the amount you need, let it set so the fumes discharge.

It's a bit of work, but well worth it. I've done it with Rustoleum's too.
Saturn
Posts: 6594
Joined: Sat Jul 13, 2002 9:06 pm
Location: Oklahoma City, OK

Post by Saturn »

Even Tamiya has an article on this.
Decanting Tamiya Sprays
"Of all the chili that I've eaten in my travels, this has the most.......Cumin."
User avatar
Captain Riker
Posts: 1638
Joined: Fri Feb 06, 2009 12:09 pm
Location: New Jersey

Post by Captain Riker »

I've read that you can de-gas the propellant first by inverting the can and spraying until it stops. Once the propellant is gone, you can just puncture the can and pour the paint out.

Not sure if it is true though.
Mascaw
Posts: 128
Joined: Sat Sep 12, 2009 9:17 pm

Post by Mascaw »

http://gamerabaenre.com/?page_id=1347

This is what I followed when I did it.
eeun
Posts: 820
Joined: Tue Jul 22, 2003 8:09 pm
Location: Ontario, Canada

Post by eeun »

I've never experienced any of the problems from degassing. Maybe Canada has different regulations on acceptable propellants or some such?

The only noteworthy thing I've experienced is primers tend to settle in the airbrush jar after about 10-15 minutes and need a bit of backflow bubbling to keep the solids mixed.

Works fine with Krylon paints including Fusion (the Fusion I did thin slightly with lacquer thinner), Dupli-color primers and paints, dirt-cheap auto primer, and Testors spray paints.

Of course, follow the health warnings on the can. I decant in a spray booth, and I've got a good vapour mask. Some rattle-can paints are pretty cancer-riffic.
World's Tallest Jawa!
Mark Yungblut
Moderator
Posts: 2463
Joined: Sat Jul 13, 2002 4:42 pm
Location: Back home in Cincy!
Contact:

Post by Mark Yungblut »

You could also just buy a jar of Model Masters Insignia white and airbrush that...
"Tell me and I forget. Teach me and I remember. Involve me and I learn."
- Benjamin Franklin

"I am recalibrating my lack of faith in humanity. I start by reading opinions on message boards…"
- Dogbert

"What is his Comprehension level? Are we talking Human, Squirrel or Anvil?"
- Dilbert
mightymax
Posts: 1665
Joined: Fri Jul 12, 2002 10:34 pm
Location: Joliet, Illinois

Post by mightymax »

There are several youtube videos on this very topic.

Cheers
Max Bryant
Post Reply