Has anyone used these on there voyager?

chiver · Post by **chiver** » Fri Jul 20, 2012 7:05 pm

Has anyone used these photoetch parts for the voyager?

http://www.paragrafix.biz/prodimg/PGX142/2.jpg

G-man · Post by **G-man** » Fri Jul 20, 2012 8:12 pm

I am in the process of using them now.
Why do you ask?
George

chiver · Post by **chiver** » Fri Jul 20, 2012 8:43 pm

Are they with it? Can u show Picts? I was. Wondering espcialy about window peices

chiver · Post by **chiver** » Fri Jul 20, 2012 8:50 pm

Even some progress Picts would be helpfull as I'm 100% sure how to work with them

G-man · Post by **G-man** » Fri Jul 20, 2012 11:44 pm

I haven't gotten to that point yet, but when i do I'll be happy to post pictures of the progress as i go.
Are you referring to the window template parts used fro cutting missing windows / paint masks?..Or are you referring to the larger window insert parts that replace the clear parts in the kit?

George

chiver · Post by **chiver** » Sat Jul 21, 2012 12:53 pm

If u look at the picture I was referig to parts 39 to 41, do the replace the plastic parts? And if you used the ones for the windows on the side of deck one, wouldn't there be a bumped out panels around the windows?

G-man · Post by **G-man** » Sat Jul 21, 2012 1:02 pm

Chiver.

They do replace the plastic parts yes, you can fill the hole in if you want to simulate glass with a mixture of white glue and water, or micro clear, or I've even seen some guys use the Testors glue for clear parts, (which is again just white glue and water mixed as i recall)

My understanding of the instructions shows that those parts should be glued in to the back side of the window openings, so that there is a flush surface on the forward facing side of the window opening.

George

chiver · Post by **chiver** » Sat Jul 21, 2012 6:02 pm

By what about the side parts for deck one? Do they do on the inside as well?

Paulbo · Post by **Paulbo** » Wed Jul 25, 2012 2:43 pm

Hi Chiver,

All of the window parts (except the cutting templates for the missing windows) mount from the inside.

Please note: I made a mistake on some of the part numbers in the instructions. This was just brought to my attention last week - I have updated the instructions. Here's a link: http://www.paragrafix.biz/instructions/PGX142.pdf

Cheers,
Paul

chiver · Post by **chiver** » Thu Jul 26, 2012 10:19 am

o ok now it makes a whole lot more sence