Any ideas to prevent losing small parts?

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
User avatar
Zubie
Posts: 1446
Joined: Mon May 05, 2008 2:03 pm
Location: Orion arm of Milky Way Galaxy
Contact:

Any ideas to prevent losing small parts?

Post by Zubie » Sun Dec 31, 2017 4:19 pm

Besides sacrificing to the god of shag carpets...

Anyhow, I've just spent way too much time looking for a carefully cut nose of a 1/72 torpedo to replace the head on the Revell 1/79 BB8 when it occurred to me, if I had been working inside a clear plastic bag...a kind of glove box, it might have been ok. The fact of the matter is, I can't say this is workable because I haven't tried it (thus the missing piece).

The thing is one frequently may need to touch up a small piece or snip or sand a tad off and sometimes it's the very pressure you use to hold the thing makes it shoot off like a watermelon pit.

I recall one thing I used to do when snipping small items like antennas and guns off trees was to back it with scotch tape before hand and that worked quite well.

Any other ideas?
Perhaps I'm old and tired, but I think that the chances of finding out what's actually going on are so absurdly remote that the only thing to do is to say, "Hang the sense of it," and keep yourself busy. I'd much rather be happy than right any day - Slatibartfast, renowned fjord designer.

mike robel
Posts: 853
Joined: Sun Mar 27, 2005 8:26 am

Re: Any ideas to prevent losing small parts?

Post by mike robel » Sun Dec 31, 2017 6:07 pm

I have done the following:

1. Cut the part in a plastic bag.

2. Tape the part to a piece of masking tape.

3. Cut the part and a portion of the runner (sprue). Use the sprue as a handle to glue the part on. After its attached, snip the runner, and touch up the part. Works for landing gear, antennae, machine gun barrels, landing wheels, and other bothersome parts.

EVApodman
Posts: 2313
Joined: Sat Sep 30, 2006 8:37 am

Re: Any ideas to prevent losing small parts?

Post by EVApodman » Sat Jan 06, 2018 12:24 pm

Lost parts are the bane of modelers everywhere.
"Nothing to do now but drink a beer and watch the universe die."
"Basically what I do everyday."

I AM Spartacus!
I'm Batman.

Don't believe everything you see on the Internet!- Abraham Lincoln

Oh my God!! It's full of plastic peanuts!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest