New to modeling and need plans.

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
Leepee
Posts: 8
Joined: Thu Dec 29, 2016 10:57 pm
Location: Portland, Oregon USA

New to modeling and need plans.

Post by Leepee »

Hi, I'm new to modeling and have always wanted to scratch build, but thought it would be expensive until I checked into styrene and it looks like unless I go nuts, it could be a reasonably priced hobby.

One thing, don't laugh...(':evil:')
I have absolutely no artistic talent or imagination whatsoever. (':oops:')

I've been looking to get some plans to follow for the first few dozen builds, but they've been hard to find or I'm not looking in the right place.
Can someone help me?

There is so much to learn!

Thanks very much,
Lee
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

Paper models can be a good source for plans if you need them, but most scratchbuilding is making something look like something other than what you started with. It's not art, just drafting. I'm using wood more and more these days, and am enough of a hippie to really enjoy putting my scraps in the compost instead of the trash.
irishtrek
Posts: 5716
Joined: Fri Sep 16, 2005 2:04 am
Location: wouldn't you like to know

Post by irishtrek »

Hey, welcome to the SSM crazy place.LOL
So what do you want to build first???
Normal?? What is normal??
Leepee
Posts: 8
Joined: Thu Dec 29, 2016 10:57 pm
Location: Portland, Oregon USA

Post by Leepee »

Andrew Gorman wrote:Paper models can be a good source for plans if you need them, but most scratchbuilding is making something look like something other than what you started with. It's not art, just drafting. I'm using wood more and more these days, and am enough of a hippie to really enjoy putting my scraps in the compost instead of the trash.
Would definitely like to use other materials. OMG in one of my long YouTube cat watching sessions, I came across guys building a Flueron which I assume is either a Dutch or French ship. Amazing. Not my thing, but still awesome.
Leepee
Posts: 8
Joined: Thu Dec 29, 2016 10:57 pm
Location: Portland, Oregon USA

Post by Leepee »

irishtrek wrote:Hey, welcome to the SSM crazy place.LOL
So what do you want to build first???
At this point it doesn't matter. I was hoping for some kind of starship, but I know the first few are going to be a lot of trial and error. I'm not really Into the gumdum suit stuff, but hey, it's all about learning st this point.
I even thought of trying out an rc bost without the motors, or a HO scale building.
I assumed that with the prevalence of computers, somebody would have posted some plans somewhere.
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

http://www.tamasoft.co.jp/pepakura-en/
(you could try looking under the "Pepakura Gallery" section on the website)
BTW -- some sites will have PDO files, which can be opened using the Pepakura Designer and Pepakura Viewer software (note: previously the Designer and Viewer were separate downloads -- but currently they are bundled together. The license key is only required for unlocking features in the Designer -- the Viewer can be used w/o obtaining keycode. The Viewer allows to view and print, but not design).

http://codex34.byethost22.com/
http://aliens.humlak.cz/
http://cleversantoro.spaces.live.com/
http://teodom.wixsite.com/domatine
http://www.freewebs.com/jaybats/takeacardanycard.htm
http://www.currell.net/models/mod_free.htm
http://www.delta7studios.com/orderpaypal.htm
http://www.fiddlersgreen.net/
http://jleslie48.com/
http://murphs-models.webs.com/
http://www.nielspapermodels.com/
https://ninjatoes.wordpress.com/
http://paper-replika.com/
http://www7a.biglobe.ne.jp/~sf-papercraft/
http://ojimak.web.fc2.com/hanger.html
http://www.freewebs.com/paragon19/
http://www.cardmodels-r.narod.ru/index-e.htm
http://www.hoxity.de/papercraft/index.html
http://www.jplanes.com/index.htm
http://www.geocities.jp/pinaconn/index.html
http://paperinside.com/

some link sites:
http://www.ss42.com/toys.html
http://www006.upp.so-net.ne.jp/zen/
http://www.tamasoft.co.jp/pepakuradb/

NOTE: one thing you'll have to be careful about is paper size. Stuff originating from the USA tends to use US Letter size (8.5" x 11") whereas paper models originating in Europe and Asia tends to be based on A4 size (8.27" × 11.69"). You'll have to be careful with "Fit" option on printout as it will resize the printout (and potentially end up with fit problems) -- this is especially true if the different sheets are provided as separate documents (which could mean the pages will not be scaled consistently).
Last edited by naoto on Fri Dec 30, 2016 12:29 pm, edited 2 times in total.
Naoto Kimura
木村直人
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

Naoto Kimura
木村直人
ausf
Posts: 24
Joined: Fri Nov 04, 2016 9:30 am

Post by ausf »

Why not buy a small kit or two to get an idea of how the materials behave?

You can buy simple rockets or saucers and add onto it if you want.

A kit doesn't have to be a huge investment and you get to mess around with glue and paint that would aid in your construction.
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

For model aeroplanes (flying type, typically made with balsawood):
http://www.outerzone.co.uk/index.asp
http://www.hippocketaeronautics.com/
http://web.archive.org/web/201104130707 ... /index.htm

Of course, as suggested by someone else, buying a kit might be easier than building from plans (especially if you're not familiar with the materials). Many of the kits from Guillows ( http://www.guillow.com/ ) have been updated with laser-cut balsawood parts (rather than the older "printwood" and die-cut sheets). The "stick-and-tissue" type of model aeroplanes had always appealed to me. Their "Fighter Jet" series was an interesting take on this ( http://www.guillow.com/1400series-fighterjets.aspx ). They used to have a similar kit of the Space Shuttle Orbiter.

As for model rockets, similarly Estes ( http://www.estesrockets.com/ ) also features laser-cut parts (a number of kits feature Tung wood rather than balsawood however) -- many of the reissued kits have simplified construction. For example, the reissued Little Joe II kit features injection-molded parts rather in place of parts you had to build up from paper, balsawood and wood dowels ( http://www.estesrockets.com/rockets/kit ... tle-joe-ii ). I had been tempted to pick up the Estes Cosmic Interceptor kit ( http://www.estesrockets.com/clearance/0 ... erceptortm ) -- especially at the sale price of about $17. Only issue I've got is a matter of a place to is limited display space (it's 40.5" long). I'm definitely glad Estes did release the "Sci-Fi Nose Cone Assortment" ( http://www.estesrockets.com/rockets/acc ... tment-5-pk ) -- which definitely makes it easier to re-create a number of previously-released SF themed kits.
Naoto Kimura
木村直人
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

Estes did release the TOS Enterprise and TOS Klingon kits. They also released an unrelated USS Atlantis kit ( http://www.spacemodeling.org/JimZ/est1283.htm ), which featured styling reminiscent of Star Trek. Not surprisingly that kit often a topic for "upscaled" (i.e. built up in larger size for mid and high power motors) -- some of which were built as "refit" (i.e. in the style of the Star Trek movies). Sirius Rocketry does offer a "refit" upscale in kit form ( https://www.siriusrocketry.biz/ishop/si ... is-14.html ). Another kit from Sirius that's interesting is the S.S. Cetris ( https://www.siriusrocketry.biz/ishop/si ... s-140.html ) -- the nosecone is available separately too0 ( https://www.siriusrocketry.biz/ishop/si ... t-138.html )
Naoto Kimura
木村直人
kenlilly106
Posts: 1302
Joined: Sun Jan 14, 2007 12:18 am
Location: in the mountains

Post by kenlilly106 »

My advice?

If you've never done this before start out simple by making a scale model of something you have around the house like a toaster or microwave or something.
You'll have a ready reference on hand and most of the time they are simple box shapes so you can concentrate on learning how to measure and cut and fit the parts but not have to worry about the complex shapes of a ship your first time out.

Ken
irishtrek
Posts: 5716
Joined: Fri Sep 16, 2005 2:04 am
Location: wouldn't you like to know

Post by irishtrek »

Better yet go for a snap together kit such as the R2/Polar Lights original series Enterprise or a different snap together kit.
Normal?? What is normal??
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

The Modular Space Toys ( http://codex34.byethost22.com/ ) is pretty nifty. There's even a build on the SSM Gallery of a model built using components from this papercraft set: http://www.starshipmodeler.org/gallery1 ... _cecil.htm
Naoto Kimura
木村直人
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

There are a lot of good and simple plans at:
http://smm.solidmodelmemories.net/Gallery/index.php
There are a few Guillows rocketships hiding in there.
USSARCADIA
Posts: 1950
Joined: Fri Jul 12, 2002 7:29 pm

Post by USSARCADIA »

I agree with Ken, start out with some simple shapes. Learn how to cut pieces out of styrene sheet and glue together with liquid glue and a needle bottle. Then move on from there. There are some tutorials on the main SM site. There are plenty of us here to help and feel free to ask any question.
Did you eat your Chocolate Frosted Sugar Bombs this morning?
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

My best advice is find a subject you REALLY want to make. If you really want it, it will give you incentive to get through the difficult parts.
Leepee
Posts: 8
Joined: Thu Dec 29, 2016 10:57 pm
Location: Portland, Oregon USA

Post by Leepee »

Thanks all, for the tips. I think I'm going to start small with the paper stuff and learn how the medium behaves.

To clarify my background and why I'm doing this. I've done many scale models kits, but they focus, inevitably on the painting aspects, and not really on the construction, which is what interests me.

Thanks again and hope to see you all around.
User avatar
Kylwell
Moderator
Posts: 29643
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

I would also highly recommend this book https://www.amazon.com/MODEL-DESIGN-BLU ... 0979175208
Abolish Alliteration
User avatar
Scotaidh
Posts: 4113
Joined: Tue Jun 15, 2004 9:55 am
Location: Moral Turpitude

Post by Scotaidh »

Leepee, welcome to the hobby and to SSM! :)

I, too, enjoy scratch-building/kit-bashing. I got a lot of my dead/donor kits from members here, who were selling off boxes of kits with which they no longer wanted to deal; Ti Raven sent me a box of single-use camera carcasses; and I've bought batches of dead kits on evil-bay.

Also, if you make it to WonderFest this year you might want to show up to the Iron Modeler thing. There's always tons of greeblies/kit-bits left on the tables afterwards - I have often come home with more greeblies than I took. :) You just have to volunteer to help clean-up; and watching Iron Modelers in action is a great way to get ideas. :)

Also, there are various challenges and contests here on-site - those are great experiences, too, I've found, for stretching what you know.
"Is Russian artillery. Is mostly on target."
Dimitry
User avatar
Lt. Z0mBe
Posts: 7311
Joined: Thu May 29, 2003 1:46 pm
Location: Balltown Kentucky, by God!
Contact:

Post by Lt. Z0mBe »

ausf wrote:Why not buy a small kit or two to get an idea of how the materials behave?

You can buy simple rockets or saucers and add onto it if you want.

A kit doesn't have to be a huge investment and you get to mess around with glue and paint that would aid in your construction.
Seconded. It's an ordeal to undertake a scratchbuild of any appreciable size. The problems you have to solve and just the prepwork are an ordeal before you make your first cut. I say this not because I doubt your abilities but because you will absolutely get burned out and put the project down after you've cut your 640th of 1000 identical bulkheads. Heck, you probably haven't figured out what tools you're gonna need yet.

Learn the small lessons first on some kits. Scratchbuild some details for them. You'll flatten the learning curve you're going to have on that scratchbuild. Then, you can knock it out of the park. :)

I hope this helps.

Kenny

www.sigmalabsinc.com


Onward, proud eagle, to thee the cloud must yield.
User avatar
artic316
Posts: 644
Joined: Fri Jul 12, 2002 10:26 pm
Location: Ontario, Canada

Just start with a doohicky

Post by artic316 »

:D Grab a doohicky, and a thingamabob and a spindle bender and lots and lots glue and hope for the best :shock: :D .
Actually find a good base item to start with a pcv tube, ship body, sub body or what ever plastic you have handy or from your local dollar store. Experiment with adding greebles(misc small pieces) to put some detail or layers on your project and have some fun. You will get better with every project you build.

Welcome once again to the asylum.
improvise adapt and overcome.We are the fellowship of modelers.
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

Naoto Kimura
木村直人
Post Reply