Surface for my build table

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
nanook177
Posts: 160
Joined: Sat Sep 02, 2006 12:52 pm

Surface for my build table

Post by nanook177 » Sat Jul 16, 2016 10:50 pm

I'm attempting a large scratch build (1/350 Excelsior from Star Trek) and I'm thinking of modifying my work area. I use portable folding tables as my normal build surface but, with having to scratch build I want to work on a more consistently straight, flat and level surface with as little deflection and deviation as possible. The folding tables work great 90% of they times, but there are definite inconsistencies in their surface that makes scratch building difficult at best. Hopefully I've explained this all clearly. Thank you all for any thoughts or ideas you might have.

User avatar
Rogviler
Posts: 4077
Joined: Thu Jan 15, 2009 7:04 pm
Location: Colorado

Post by Rogviler » Sun Jul 17, 2016 12:39 am

Do you have a building materials recycling store near you? Here there's a Habitat for Humanity store, for instance. They sell just about everything, but of interest to you might be stuff like old countertops and doors, both of which make great surfaces to build on. They're usually cheap too.

Another good one is cabinet makers. I've gotten a ton of laminated MDF and plywood for free that way.

-Rog
You can now buy gluten-free apples and non-GMO water. We are truly living in the future!

kenlilly106
Posts: 1229
Joined: Sun Jan 14, 2007 12:18 am
Location: in the mountains

Post by kenlilly106 » Sun Jul 17, 2016 9:27 am

Second the counter top and door idea, I like counter tops because the laminate surface is dead flat and can be cleaned easily.

If you can find a solid core door that's plain (no embossing or raised panels) they make excellent work surfaces.

You can also check out the clearance rack at the local home improvement store, sometimes they have laminate counter tops in there that have cosmetic damage and can't be sold as new. I've seen large sections go for less than half price as long as you're not picky on color or pattern.

Ken

User avatar
USSARCADIA
Posts: 1826
Joined: Fri Jul 12, 2002 7:29 pm

Post by USSARCADIA » Sun Jul 17, 2016 11:58 am

A solid core door is the answer. My dad uses one to do his architectural drawings on. A piece of laminate countertop is good too, but if you would spill glue on the laminate there may be ugly results. Most home centers stock at least one type of SC door.
Did you eat your Chocolate Frosted Sugar Bombs this morning?

Andrew Gorman
Posts: 2334
Joined: Fri Jul 12, 2002 4:56 pm
Location: God-forsaken suburban strip mall hell of Chesterfield County VA

Post by Andrew Gorman » Sun Jul 17, 2016 1:07 pm

Best work benches I've ever had were industrial packing tables. Super sturdy with laminate tops:
http://www.uline.com/BL_3853/Industrial-Packing-Tables
If I had the space I'd buy another right now.

User avatar
Rocketeer
Posts: 1185
Joined: Fri Jan 18, 2008 4:48 pm
Location: The outskirts of Hobart, WA

Post by Rocketeer » Sun Jul 17, 2016 3:04 pm

USSARCADIA wrote:... if you would spill glue on the laminate there may be ugly results...
I don't think you have to worry about that. I have a formica-covered countertop as my work surface, and I've spilled just about every kind of thinner/cement on it, with no adverse results.

Wug
Posts: 1448
Joined: Sun Sep 05, 2004 8:52 pm
Location: Kentucky

Post by Wug » Sun Jul 17, 2016 4:15 pm

Go to a glass store. Buy a sheet of glass in the size you want and have them dull the edges so it doesn't cut you. It cost a lot less than I expected.

The glass is very flat and makes a perfect surface for sandpaper. You can scrape anything off of it with a razor blade scraper. Put a self-healing mat on it when you cut stuff.

Mike

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests