Another mini lathe (Unimat 3 clone)

Got a question about techniques, materials or other aspects of physically building a model? This is the place to ask.

Moderators: DasPhule, Moderators

Post Reply
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Another mini lathe (Unimat 3 clone)

Post by Andrew Gorman »

It looks like Grizzly is now selling the Poseidon Unimat-3/Unimat-4 clone:
http://www.grizzly.com/products/4-x-6-M ... athe/G0745
Unimat-3s are nice machines, and I haven't heard anything really bad about the Poseidon. This is bigger than a Unimat DB/SL. but still small enough to pick up with one hand and put away in a closet when you're done. IF you are very tight on space this could be worth checking out. Unimat 3 and 4 accessories should work just fine. The many Sieg 7X lathes or an old Atlas 618 are much more machine and use standard tooling for not that much more money but they really need a dedicated work area. This little guy can come out and work on the kitchen table. Some more information on the original Unimat 3/4 at:
http://www.lathes.co.uk/emco/page3.html
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

I was mistaken- this machine is not the Taiwanese Unimat 3/4, but Sieg product from China:
http://www.siegind.com/products_detail/ ... cb59f.html
Still, there are darn few new tabletop lathes available these days.
User avatar
naoto
Posts: 29234
Joined: Fri Jul 12, 2002 3:22 pm
Location: Temple City, California, USA

Post by naoto »

There are times where a tractor could come in handy...
http://www.wwideas.com/other/the-biggest-wooden-bowl/
Naoto Kimura
木村直人
User avatar
Kylwell
Moderator
Posts: 29643
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

My god that's TINY! I thought my 6x10 was small.
Abolish Alliteration
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

Tiny it is, and tiny can be good. The Unimat DB/SL is around a 4X5. In "The Amateurs' Lathe by Mr. Sparey he points out that the the difference between a professional machine and an amateur machine is that the amateurs' is ALWAYS being stretched to the limits of its' capacity. I'd love to have a Monarch 10EE and it would make a lot of the things I make with difficulty on the Craftsman easy, but where the heck would I put it in a city apartment and a Model T era garage I share with a car. A 3500 pound machine vs. 150 pounds for the Craftsman. And well under 30 pounds for the Unimat. There are not a lot of options for a tabletop machine. They are a lot less capable than the Sieg 7X lathes, but the small size can make the difference between a lathe or no lathe at all for some people. Here are some links for comaparison:
Monarch 10EE, the gold standard:
http://www.lathes.co.uk/monarch/page2.html
Atlas/Craftsman 6X18-old but reliable:
http://www.lathes.co.uk/atlas6inch/
And the Unimat-Set it up on any table and put it back in the closet when you are done:
http://www.lathes.co.uk/unimat/
Nebdcbdepo
Spammer - Locked
Posts: 10
Joined: Tue Mar 08, 2016 4:39 pm

Post by Nebdcbdepo »

This is very nice and cool post tahsnk for this ..........!!!!!!!!!!!!!!!!!!!!!!!!
Post Reply