New Alumilite Part B

The place to discuss all aspects of building models from scratch.

Moderators: Joseph C. Brown, Moderators

Post Reply
User avatar
TazMan2000
Posts: 1127
Joined: Wed Jul 22, 2009 8:26 pm
Location: Sherwood Park, Alberta, Canada

New Alumilite Part B

Post by TazMan2000 »

I just picked up a new batch of White Alumilite 2 part resin. I have to say, that I'm pretty impressed with the new Part B stuff. You don't have to shake the Part B, which aids in lessening the amount of air bubbles, but also, the Part B is considerably less viscous.
Mixed together, I have noticed due to the lessened viscosity, that it flows into the molds much easier, and being clear, allows easy inspection and removal of air bubbles by using a toothpick, if you are pouring one part molds.
After the material dries I also noticed a greater ductility in the poured pieces compared to the old stuff, which usually hardened to a peanut brittle consistency.
Curing time is increased, which can be a good or bad thing depending on what you prefer.
I know there are other resins out there that GK'ers and others use, but I have stuck with Alumilite, mainly for the reason it is carried locally by my hobby shop. I haven't experimenting with paint adhesion yet.

TazMan2000
Post Reply