Resin casting question

The place to discuss all aspects of building models from scratch.

Moderators: Joseph C. Brown, Moderators

Post Reply
User avatar
abledog
Posts: 482
Joined: Sat Jun 11, 2005 3:22 pm
Location: California
Contact:

Resin casting question

Post by abledog »

Okay... I'm learning to cast resin very soon, and I have a scratchbuild project I want to apply this to. My intention is to design this thing so that it can be assembled with a hollow hull. I don't have access to a roto-caster, so I'm figuring out how to build my parts accordingly.

So how thin can my parts be, so that when I cast them I can avoid warping?

Thanks!

Able D
Able D.

http://www.clarkworx.com

Greater is He that is in me than he that is in the world.
User avatar
Stu Pidasso
Posts: 20350
Joined: Thu Jul 11, 2002 7:30 pm
Location: The Human Dutch Oven.

Post by Stu Pidasso »

If you want an accurate response, you might have to post pictures so us in the field can give good advice.
So me, trying to be tolerant of everybody's situations, went to a feminist picnic. Things fell apart fairly quickly after nobody made any sandwiches.
User avatar
abledog
Posts: 482
Joined: Sat Jun 11, 2005 3:22 pm
Location: California
Contact:

Post by abledog »

Thanks... I'll have to do that once I'm far enough in the assembly.

Able D
Able D.

http://www.clarkworx.com

Greater is He that is in me than he that is in the world.
User avatar
Joseph Osborn
Posts: 1323
Joined: Thu Oct 06, 2005 9:22 pm
Location: Alabamastan
Contact:

Post by Joseph Osborn »

Just to throw out some ideas: You don't necessarily need a rotocasting machine to do a rotocast piece; you can turn it by hand and get nearly as good results. A rotocasting machine is great for mass production, but it doesn't sound like you intend to make a bunch of parts in a short time. Another alternative may be epoxy fiberglass lay-up in a silicone mold. You can get a very strong and thin shell with very fine surface detail using this method.
User avatar
Ziz
Posts: 9374
Joined: Fri Jul 12, 2002 9:24 pm
Location: Long Island, NY
Contact:

Post by Ziz »

Rotocasting is only necessary if you're trying to make a large part with no seams on it aside from where the mold splits. If it's going to have edges and mating points where two or more pieces come together to form the whole, you don't have to rotocast it, just do each piece as a normal mold.
Modular
Models

Build your fleet
YOUR way.

http://www.modular-models.com
----------------------------------------------------------
"I know you think you understand what you thought I said, but I'm not sure you realize that what you heard is not what I meant." - Alan Greenspan
____________________________________
"The customer that spends the least complains the most."
User avatar
abledog
Posts: 482
Joined: Sat Jun 11, 2005 3:22 pm
Location: California
Contact:

Post by abledog »

Hi guys... here are a couple of illustrations to show what I'm talking about

I'm using sheet styrene..

http://i17.photobucket.com/albums/b95/a ... tic-01.jpg


..but I'm thinking I'll laminate it to make it thicker so I can cast it and avoid a warping problem..

http://i17.photobucket.com/albums/b95/a ... tic-02.jpg

Am I even on the right track here?

Thanks!

Able D
Able D.

http://www.clarkworx.com

Greater is He that is in me than he that is in the world.
Tankmodeler
Posts: 949
Joined: Fri Jul 30, 2010 12:04 am
Location: Ontario

Post by Tankmodeler »

You're on the right track, but you also have to take absolute size into account. You'll probably need to add some interior gussets to help it stay the right shape. If the sides are 1/2" x 1", then .060" walls are proabbly OK. If the part is 2" x 4" then the walls should be something like 1/8 or more both to get a good pour and to keep things flat & square. How long you leave the parts in th emould also has an impact on warping. Take them out too soon and they will be soft and prone to moving. Let them set hard and they are less likely to warp, but it will slow down your production rate a lot.

One of the key things about this is that it's a craft not a science. It takes a lot of experience to have a good idea of exactly what will work and even then, there's no guarantees. Even the pros pour crap parts from time to time.

Paul
The future is in your hands. Build it!
User avatar
abledog
Posts: 482
Joined: Sat Jun 11, 2005 3:22 pm
Location: California
Contact:

Post by abledog »

Thanks Tankmodeler... I came across some basic construction issues that I'll have to address, that in themselves seem to steer me in that direction, (or something close). ;) This is going to be a big learning curve for me, but I'm excited to learn! :D

Able D
Able D.

http://www.clarkworx.com

Greater is He that is in me than he that is in the world.
skymods
Posts: 59
Joined: Tue Aug 13, 2002 2:20 pm
Location: Carmichael, CA
Contact:

Post by skymods »

Abledog, more questions. Why are you making it hollow? For lighting or weight issues?

How large? The size of the part could also make a difference in a casting strategy.

Dave
Post Reply