Spheres and hemispheres

The place to discuss all aspects of building models from scratch.

Moderators: Joseph C. Brown, Moderators

Post Reply
User avatar
Dr. Yo
Posts: 15161
Joined: Sun Jan 04, 2004 5:45 pm
Location: Craig York,Austin, Texas, Mars

Spheres and hemispheres

Post by Dr. Yo »

I've done some searching, and couldn't find another mention, so I
thought I'd pass this on. I discovered a good source of cheap styrene
spheres and hemisperes: Fishing bobbers. I had read awhile back a
passing reference to a fishing bobber being used as the bottom of
an iconic robot, the Neuspotter. I went to a local Sports outlet, ( Academy
Surplus ) and scored a bag of fifty in various sizes ranging from
1/2 to an inch in diameter, for three bucks.

Many of these things are molded with a raised flange around the
circumference, making sawing them in two for domes a breeze.
"Semper fiendish"-Wen Yo
ajmadison
Posts: 1230
Joined: Mon Jul 15, 2002 10:53 am
Location: windermere, fl
Contact:

Post by ajmadison »

My very first serious scratchbuild sported a section of a fishing bobber. I needed a large hemispherical shape for the bridge.

Though not all bobbers are the same. Some, are made of a brittle styrene, and attempts to section them destroys their structural integrity, in other words, you get a ragged edge, and efforts to smooth the edge only causes more bits and pieces to fly off.
User avatar
Kolschey
Posts: 1752
Joined: Mon Oct 24, 2005 1:13 pm
Location: What? You mean the chip in my head isn't working?!? Don't tell me you have to drill another hole..
Contact:

Post by Kolschey »

Good suggestion. I've used them before combined with other elements to create fuel tanks for various vehicles. Here's one before priming and painting.

http://www.firstgearterritories.net/HTM ... F_L_3Q.jpg
Andrew Gorman
Posts: 2698
Joined: Fri Jul 12, 2002 4:56 pm
Location: Escaped from darkest suburbia!

Post by Andrew Gorman »

Fishing bobbers work well! If they are brittle I've had some luck in cutting by packing them with silly putty. This works for gum machine capsules too.
User avatar
Mr. Badwrench
Posts: 9587
Joined: Fri Jul 12, 2002 6:31 pm
Location: Wheatridge, Co.

Post by Mr. Badwrench »

The main pressure hull of this model is a fishing float. It was much easier to work with than the ping pong balls that make up the fuel tanks. The canopy and the engine bells are different types of fishing floats.
I speak of the pompatous of plastic.
Post Reply