Alternative to PE screen needed

The place to discuss all aspects of building models from scratch.

Moderators: Joseph C. Brown, Moderators

Post Reply
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Alternative to PE screen needed

Post by scratchy »

Hello all,

I need an alternative to Photo Etched screen, but just as fine. I'll need large amounts for a project that I started lately (link below left). If I purchased Photo Etch for this, it would destroy my bank account.

I looked at coffee filters, but the screen is too fine. I also consider window screen, but the screen is woven and too large.

I'll need sheets of brass as well, and I'll purchase this at my local auto parts store (brass shim stock)

Any suggestions on the brass screen would be appreciated.
User avatar
Johnnycrash
Posts: 5563
Joined: Fri Jul 12, 2002 12:57 pm
Location: Timmins, Ontario, Canada

Re: Alternative to PE screen needed

Post by Johnnycrash »

scratchy wrote: (link below left).
Where?? I don't see no link.

So, what's the project?? Just how much area of mesh do you need?? Square, round, or odd shaped areas??
John Fleming
I know that's not what the instructions say, but the kit's wrong anyway.
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Johnnycrash,

I'm building a model of the Death Star II. I have a link at the bottom left of this post that shows my current projects (Scratchy of Facebook), there are images of the progress so far. As mentioned, I'm gonna need a LOT.

I was thinking of contacting a local laser cutter businesses and ask if they have a reject bin.
User avatar
Johnnycrash
Posts: 5563
Joined: Fri Jul 12, 2002 12:57 pm
Location: Timmins, Ontario, Canada

Post by Johnnycrash »

scratchy wrote:I'm building a model of the Death Star II.
Ah. I clicked the link, but it was just a link to ALL your stuff. I thought there was a project specific link.
I was thinking of contacting a local laser cutter businesses and ask if they have a reject bin.
They won't have anything you can use (well, not for the mesh). Fine mesh like what I think you are looking for will not be laser cut, but chemically milled (PE).


I'm not sure how that much mesh would be needed for the DS. I'm obviously missing something. I think I need to eat lunch...
John Fleming
I know that's not what the instructions say, but the kit's wrong anyway.
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Johnnycrash wrote:I'm not sure how that much mesh would be needed for the DS.
If I could find a Shoebox full of reject brass PE, fine mesh, coffee filter screen, or anything like that, then I would be satisfied.
User avatar
Johnnycrash
Posts: 5563
Joined: Fri Jul 12, 2002 12:57 pm
Location: Timmins, Ontario, Canada

Post by Johnnycrash »

Nylon Screening Mesh

Polyester Screening Mesh

Another source, that I thought of first was Small Parts. But they don't seem to be around any more (well, not like they USED to be, so...)
John Fleming
I know that's not what the instructions say, but the kit's wrong anyway.
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Thanks for the links John!
User avatar
Umi_Ryuzuki
Posts: 3841
Joined: Fri Jul 12, 2002 2:22 pm
Location: PDX, Oregon
Contact:

Post by Umi_Ryuzuki »

Surely there must be a gravel or gold industry in BC that needs
screens and mesh.

I purchased some really fine wire screen from Western Wire here in Portland, Oregon.
It was sold off the roll, four feet wide.

http://thewesterngroup.com/about-us/

Western Canada / Vancouver
1750 Brigantine Drive
Coquitlam, BC V3K 7B5

PHONE: 604.520.3073

It was totally worth my time to visit their lobby.

Of course with nylon, and other plastics, you don't have to worry about fraying.
'
"I have to go now,... because my life is stupid and leprachans are dorks."
Nyow!
/
=^o^=
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Umi_Ryuzuki wrote:Surely there must be a gravel or gold industry in BC that needs
screens and mesh.

I purchased some really fine wire screen from Western Wire here in Portland, Oregon.
It was sold off the roll, four feet wide.

http://thewesterngroup.com/about-us/

Western Canada / Vancouver
1750 Brigantine Drive
Coquitlam, BC V3K 7B5

PHONE: 604.520.3073

It was totally worth my time to visit their lobby.

Of course with nylon, and other plastics, you don't have to worry about fraying.
Thanks for the link Umi, that supplier is just twenty minutes down the highway for me. I'll give them a call Monday.
User avatar
Kylwell
Moderator
Posts: 29643
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

Contact the people who make PE for models, explain what you're doing and see if they'd be willing to sell or give you rejects.
Abolish Alliteration
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Thanks Kylwell. I have an alternative plan in the works, which may prove to be the better option.
User avatar
SpaceRanger1
Posts: 884
Joined: Mon Oct 20, 2008 4:56 pm
Location: Carrollton, Texas

Post by SpaceRanger1 »

Look for Lipton's Tea in the pyramid bags. The bags are made of a very fine plastic mesh, probably nylon. After brewing, the tea leaves can be dried and used as ground clutter in dioramas. And as a bonus, you get some tasty tea to drink while building your model!
Michael McMurtrey
IPMS-USA #1746
IPMS-Canada #1426
Carrollton, TX

"Yup, exactly what SpaceRanger1 is saying. 100%" — seashark
User avatar
Mr. Badwrench
Posts: 9587
Joined: Fri Jul 12, 2002 6:31 pm
Location: Wheatridge, Co.

Post by Mr. Badwrench »

I used to buy fuel filter screen from the auto parts store.
I speak of the pompatous of plastic.
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

Thanks for the ideas guys!

I was reading up on the DIY photo etch on this site and as it so happens, my local electronic store has everything except for the brass shim stock.... I can get that at my local auto parts store.

I think I might try the technique for my Death Star 2 build.
User avatar
Umi_Ryuzuki
Posts: 3841
Joined: Fri Jul 12, 2002 2:22 pm
Location: PDX, Oregon
Contact:

Post by Umi_Ryuzuki »

Steba of Germany...
Gitter, Platten, Profilbleche und Stifte aus Metall und Kunststoff

http://www.steba.org/Katalog/katalog.html


PDF Catalog
http://www.steba.org/Katalog/Katalog_25 ... ndatei.pdf
'
"I have to go now,... because my life is stupid and leprachans are dorks."
Nyow!
/
=^o^=
User avatar
Kylwell
Moderator
Posts: 29643
Joined: Sun Nov 02, 2003 9:25 pm
Location: Lakewood, CO
Contact:

Post by Kylwell »

Umi_Ryuzuki wrote:Steba of Germany...
Gitter, Platten, Profilbleche und Stifte aus Metall und Kunststoff

http://www.steba.org/Katalog/katalog.html


PDF Catalog
http://www.steba.org/Katalog/Katalog_25 ... ndatei.pdf
:shock: oh dear lord I'm in nerdvana.... why can this be in English!?
Abolish Alliteration
mightymax
Posts: 1665
Joined: Fri Jul 12, 2002 10:34 pm
Location: Joliet, Illinois

Post by mightymax »

Have you tried looking at a fabric store?

Max Bryant
User avatar
scratchy
Posts: 1661
Joined: Fri Feb 06, 2009 8:06 pm
Location: Langley, British Columbia Canada
Contact:

Post by scratchy »

mightymax wrote:Have you tried looking at a fabric store?

Max Bryant
That hasn't occurred to me, would something like a rigid mesh be available at a fabric store?

Here's a link to the Death Star II build up on SSM.
Post Reply