Search found 212 matches

by TurkeyVolumeGuessingMan
Wed Jun 27, 2018 9:33 pm
Forum: Finishing
Topic: Vallero
Replies: 16
Views: 49214

Re: Vallero

Is it "vallero or Vejio?I was wondering about these paints.They are acrylic urethane paints said to be "airbrushable" strait out of the bottle(although I would thin them anyway). I was curious to use Vallejo Air because I hear it smells like candy. But today I just got an email from ...
by TurkeyVolumeGuessingMan
Sat Jun 23, 2018 9:14 am
Forum: Finishing
Topic: UV Reflective Paints
Replies: 7
Views: 27177

Re: UV Reflective Paints

naoto wrote: Fri Jun 22, 2018 10:14 amOn a sidenote... how many of us remember the blacklight poster fad?
Yeah, in the '80s my friend had a Led Zeppelin blacklight poster. It really glowed when he shined his blacklight on it. Spencer Gifts had a lot of that kind of stuff in the back of their stores. Dunno what they're like anymore.
by TurkeyVolumeGuessingMan
Thu Jun 21, 2018 11:17 pm
Forum: Finishing
Topic: UV Reflective Paints
Replies: 7
Views: 27177

Re: UV Reflective Paints

I've used the fluorescent/glow-in-the-dark lacquers by Gaia Notes. I believe it is the UV-reflective element of the paint that forms very hard clumps on the bottom of the bottles which need to be stirred very well in order for the paints to work properly. They glow in the dark, but they aren't like ...
by TurkeyVolumeGuessingMan
Thu Jun 14, 2018 2:07 am
Forum: Finishing
Topic: Weathering/paint chipping&rusting effects
Replies: 12
Views: 36251

Re: Weathering/paint chipping&rusting effects

I seem to remember someone online mentioning a technique using canopy/white glue between coats of paint. Has anyone tried this with Micro Kristal Klear or something?
by TurkeyVolumeGuessingMan
Sun Apr 08, 2018 9:45 pm
Forum: Scratchbuilding
Topic: clear resin curing
Replies: 2
Views: 14601

Re: clear resin curing

Thanks. The instructions did mention about helping the curing process. It was rather warm last week, but this weekend it suddenly became cold again. I can try setting the molds on the window sill to hopefully let the sun warm them up. At least the one that I haven't yet opened.
by TurkeyVolumeGuessingMan
Sun Apr 08, 2018 7:37 pm
Forum: Scratchbuilding
Topic: clear resin curing
Replies: 2
Views: 14601

clear resin curing

Does clear resin take a longer time to cure than regular resin? Last week I tried out creating silicone molds for resin casting for the first time. I cast some flight decks of a carrier ship from Yamato in clear. I injected the clear resin Saturday afternoon. After 24 hours, I took one out of its mo...
by TurkeyVolumeGuessingMan
Sun Mar 25, 2018 10:58 pm
Forum: Lighting & Electronics
Topic: Identifying Mystery LEDs?
Replies: 5
Views: 19619

Re: Identifying Mystery LEDs?

If you don't have an LED tester, you can just use a CR2032 battery. Just slide it between the prongs and a 3mm LED ought to light up.
by TurkeyVolumeGuessingMan
Mon Mar 12, 2018 8:34 pm
Forum: Lighting & Electronics
Topic: NEW: flickering SMDs
Replies: 4
Views: 20417

Re: NEW: flickering SMDs

I've found regular flickering LEDs at Dollar General in the form of faux "tea candles." Take 'em out of their faux candle holder and remove the faux silicone rubber "flame" and you've got 'em. For a buck each you can't go wrong. Like I said, these are SMDs. Flickering LEDs are n...
by TurkeyVolumeGuessingMan
Sun Mar 11, 2018 6:47 pm
Forum: Lighting & Electronics
Topic: NEW: flickering SMDs
Replies: 4
Views: 20417

NEW: flickering SMDs

Jerry at HDA Modelworx has requested his factory to custom make flickering 0805 SMDs. AFAIK, nobody else has these. He's sent me red, blue, yellow, green, white, and warm white flickering SMDs and these are pretty cool. My mind is working on what I could use these on. These are neat.
by TurkeyVolumeGuessingMan
Tue Feb 27, 2018 7:39 pm
Forum: Lighting & Electronics
Topic: Magnetic energy conductors
Replies: 8
Views: 26471

Re: Magnetic energy conductors

What I want to do is have a model with a rather flat underside be magnetically attached to a base, so that the power will transfer through the plastic without contacting metal points. A switch can turn it on and off, and the model can still be removable from its base. I think user Ultron was telling...
by TurkeyVolumeGuessingMan
Tue Feb 27, 2018 12:16 am
Forum: Lighting & Electronics
Topic: Magnetic energy conductors
Replies: 8
Views: 26471

Re: Magnetic energy conductors

Thanks. That's not really what I had seen, but it's a start.
by TurkeyVolumeGuessingMan
Thu Feb 22, 2018 12:46 am
Forum: Lighting & Electronics
Topic: Magnetic energy conductors
Replies: 8
Views: 26471

Magnetic energy conductors

I once saw a guy who was able to power a lit Millennium Falcon model by attaching the power to the ship's hull via magnets. The energy flowed through the plastic into the corresponding connectors attached to the interior of the hull. Could anyone tell me what this sort of thing is called, and where ...
by TurkeyVolumeGuessingMan
Mon Feb 19, 2018 11:14 pm
Forum: Lighting & Electronics
Topic: What to light on starships? And how?
Replies: 7
Views: 21903

Re: What to light on starships? And how?

I presume by "light strips" he means LED tape.
by TurkeyVolumeGuessingMan
Thu Feb 15, 2018 9:37 pm
Forum: Lighting & Electronics
Topic: Number of Fiber to LED
Replies: 8
Views: 21907

Re: Number of Fiber to LED

White paint refracts light, while metallic paint reflects it. Refraction is better for lighting up windows and such.
by TurkeyVolumeGuessingMan
Wed Feb 14, 2018 2:27 am
Forum: Finishing
Topic: Clean-up and Priming Shapeways parts...?
Replies: 3
Views: 11491

Re: Clean-up and Priming Shapeways parts...?

It's been said on the Shapeways site that washing the parts in alcohol and even acetone works. Unlike styrene, the material that Shapeways parts is made of won't get damaged from it. After my initial attempt at washing the parts, I ended up using acetone and an old toothbrush to get the rest of that...
by TurkeyVolumeGuessingMan
Mon Jan 29, 2018 1:46 am
Forum: Finishing
Topic: Q about thinning Mig acrylics
Replies: 8
Views: 35121

Q about thinning Mig acrylics

I'm looking at getting Mig's paint color set for the Su-35 Flanker. I was wondering if I could just use Tamiya's acrylic thinner on it, just as I can with Model Master Acryls? How about lacquer thinner? Thanks in advance.
by TurkeyVolumeGuessingMan
Mon Dec 11, 2017 11:21 pm
Forum: Lighting & Electronics
Topic: Drill bits for Fiber Optics
Replies: 7
Views: 26230

Re: Drill bits for Fiber Optics

I use Tamiya's fine drill bit set. It has a .3 and a .8 drill bits, which are close enough to .25 and .75. There's another drill bit set for larger jobs, from 1mm to 3mm. You can look for these at your hobby store or online.
by TurkeyVolumeGuessingMan
Sun Dec 03, 2017 9:45 pm
Forum: Construction
Topic: using "bluestuff" for first time
Replies: 7
Views: 26900

Re: using "bluestuff" for first time

Thanks for the links. I've never seen, let alone even heard, of the UV liquid craft resin. Definitely gotta give that a try.....does it dry hard or kinda rubbery soft?? There is a Daiso store here, so I might go for a visit. The packaging for the UV-curing liquid resin is in English as well as Japa...
by TurkeyVolumeGuessingMan
Thu Nov 30, 2017 10:11 pm
Forum: Construction
Topic: using "bluestuff" for first time
Replies: 7
Views: 26900

Re: using "bluestuff" for first time

Hi all, Just wondering if anyone here has used "bluestuff" by Greenstuff World? :D Trust me. This stuff is awesome. You just aren't using it right. Watch this video by Plasmo to learn how to do it. If you are ensconcing a part into a big wad and then trying to cut it open, then it is just...
by TurkeyVolumeGuessingMan
Wed Nov 29, 2017 2:42 am
Forum: Finishing
Topic: Painting a Checkerboard pattern
Replies: 10
Views: 24537

Re: Painting a Checkerboard pattern

FWIW, Hasegawa makes a clear masking sheet with 1mm gridlines called their Try Tool Application Sheet. I have it with white gridlines for dark surfaces and black gridlines for lighter surfaces. http://www.hasegawa-model.co.jp/product/tf916/ I've never had the occasion to use it much. It was useful f...
by TurkeyVolumeGuessingMan
Tue Nov 21, 2017 6:57 pm
Forum: Lighting & Electronics
Topic: Why is my 555 timer not blinking?
Replies: 30
Views: 372188

Re: Why is my 555 timer not blinking?

With the experience I now have, I was able to bang out another strobing circuit rather quickly last night. I tested it and it works. This has been an interesting pursuit of knowledge, and it's a heck of a lot cheaper than buying a $30 Arduino board like several people have told me.
by TurkeyVolumeGuessingMan
Mon Nov 20, 2017 4:17 am
Forum: Lighting & Electronics
Topic: Why is my 555 timer not blinking?
Replies: 30
Views: 372188

Re: Why is my 555 timer not blinking?

Thanks for all the advice. I heated up the contacts to pull the diode out, flipped it, and now it works! I didn't have to touch the capacitor. I apparently have the negative prong of the capacitor hooked up to prong 2 of the 555 chip. Should I go ahead and flip the capacitor anyway? EDIT: I flipped ...
by TurkeyVolumeGuessingMan
Sun Nov 19, 2017 11:01 pm
Forum: Lighting & Electronics
Topic: Why is my 555 timer not blinking?
Replies: 30
Views: 372188

Re: Why is my 555 timer not blinking?

Since you say that you successfully built a strobe light on bread board I can only assume that your wiring/soldering is the problem. Double check your wiring and connections. Personally I would have used a board with copper traces on it already. If possible remove the components and put them back o...
by TurkeyVolumeGuessingMan
Sun Nov 19, 2017 8:10 am
Forum: Lighting & Electronics
Topic: Why is my 555 timer not blinking?
Replies: 30
Views: 372188

Re: Why is my 555 timer not blinking?

Can anyone help me? I have successfully built a strobe light on my breadboard, but when I attempted to solder up a circuit board for it, I only get a solid light. Here is a video showing what I have done. Can anyone give me any advice? I can only think that perhaps the diode is polarized and that I ...
by TurkeyVolumeGuessingMan
Tue Oct 24, 2017 12:13 am
Forum: Lighting & Electronics
Topic: PCB design
Replies: 8
Views: 24235

Re: PCB design

So I assume what you do is place the 555 chip onto the PCB, bend the legs on the other side, insert the resistors, capacitors, etc into the holes and have them touching each other, and then solder them into place. Right?
by TurkeyVolumeGuessingMan
Wed Oct 18, 2017 8:24 pm
Forum: Scratchbuilding
Topic: "Blue Stuff" reusable molding (aka Oyumaru)
Replies: 19
Views: 73041

Re: "Blue Stuff" reusable molding (aka Oyumaru)

I wonder if the stuff could be used for filling back in drilled out windows for interior lighting, case in point, my 1/300 Seaquest Dsv replica 😄 DLM's advice on doing stuff like that would be to place tape across the holes and fill in the back sides with clear resin. I am sure Sukeru-kun could do ...
by TurkeyVolumeGuessingMan
Wed Oct 04, 2017 2:11 am
Forum: Lighting & Electronics
Topic: A few questions about lighting a Zvezda Star Destroyer
Replies: 3
Views: 12037

Re: A few questions about lighting a Zvezda Star Destroyer

Thanks, that's good advice. I have drilled a fair few holes already, and noticed that just shining a light behind them looks OK. I may try a led strip behind the holes, using clear glue to fill the holes instead of running fibres. At least in some locations this would work well I believe (Like the ...
by TurkeyVolumeGuessingMan
Tue Oct 03, 2017 9:29 pm
Forum: Lighting & Electronics
Topic: A few questions about lighting a Zvezda Star Destroyer
Replies: 3
Views: 12037

Re: A few questions about lighting a Zvezda Star Destroyer

It sounds like you really got ripped off. At least you can still use the battery pack and fiber optics. Considering that a Star Destroyer does not have flashing nav lights and such, you could buy your own LEDs and resistors to light up this kit on your own. Assuming you have a soldering iron, you co...
by TurkeyVolumeGuessingMan
Thu Sep 28, 2017 2:23 am
Forum: Construction
Topic: Soft Vinyl model needs some weight suggesstions needed for filler(s)!!!
Replies: 10
Views: 26541

Re: Soft Vinyl model needs some weight suggesstions needed for filler(s)!!!

I'm currently working on an Elfin soft vinyl figure of Yuri from Dirty Pair. This is a picture of the kit I found on the web: http://image1.fg-site.net/image/mid/63/mid62415_0_420963.jpg I put large fishing weights in her boots and then filled around them with model railroad plaster. She's posed on ...
by TurkeyVolumeGuessingMan
Wed Sep 27, 2017 9:36 pm
Forum: Finishing
Topic: Priming model options
Replies: 1
Views: 6382

Re: Priming model options

Mr. Primer Surfacer is Creos's primer for resin. I don't think it smells all that bad, but then again I don't think Tamiya's primer smells bad either. They both smell like strawberries compared to Gaia Notes primers. GN's black primer stinks like rotting meat in a paper mill or something and my wif...