Search found 22 matches

by Stingray
Tue Dec 06, 2005 3:48 pm
Forum: Finishing
Topic: Model Master coverage and drying time issues.
Replies: 15
Views: 10576

They work fine in enamels though. I use BBs in my paint too.

-S
by Stingray
Tue Dec 06, 2005 10:27 am
Forum: Finishing
Topic: Mr. Masking Sol Neo
Replies: 5
Views: 4516

It softens the decals so that they conform better to irregular surfaces.

-S
by Stingray
Wed Nov 30, 2005 12:24 pm
Forum: Finishing
Topic: Decal printing paper?
Replies: 9
Views: 8524

I don't know the brand, but I've seen decal printing paper in the model section at Hobby Lobby. They have white and clear.

-S
by Stingray
Tue Nov 29, 2005 3:43 pm
Forum: Construction
Topic: Where can I find cheap paint?
Replies: 17
Views: 19579

Paint is something that I try not to be cheap on. It's worth buying the good stuff IMO.

-S
by Stingray
Tue Nov 29, 2005 3:42 pm
Forum: Construction
Topic: Vac-Formed Clear Plastic To Resin Crazing Help
Replies: 11
Views: 10882

big-dog wrote:VERY carefully applied epoxy should work, hold anything pretty much forever, and doesn't fog.
That's what I use on clear parts. I mix a little on a scrap of styrene and then use a toothpick to apply a drop where needed, which will really help you control where it goes.

-S
by Stingray
Tue Nov 29, 2005 12:12 pm
Forum: Construction
Topic: Need putty Help
Replies: 20
Views: 14522

TER-OR wrote:This is why I use Aves Epoxy putty for most tasks. Frequently I won't need to sand.
I just recently started using Aves products. I'm pretty sure the squadron putty that I have on hand will dry out before I use any more of it. Should have switched years ago. Aves is fantastic stuff.

-S
by Stingray
Tue Nov 29, 2005 11:38 am
Forum: Finishing
Topic: Help with airbrushing...badger 350..
Replies: 15
Views: 9782

I'd guess the problem is the compressor too. Have you tried spraying just thinner or water to see if it still sprays the same? Just trying to eliminate the possiblity of the problem being that the paint isn't thinned enough.

-S
by Stingray
Tue Nov 29, 2005 10:49 am
Forum: Finishing
Topic: Clear coats
Replies: 10
Views: 8240

darth_daniel wrote:I´m afraid Revell colours (which are the only ones to fit into my airbrush)
I don't understand this statement. What kind of airbrush will only use paint from one manufacturer?

-S
by Stingray
Thu Nov 17, 2005 1:44 pm
Forum: Finishing
Topic: Removing Decals
Replies: 4
Views: 4484

Without clear coat they should come off by simply holding a damp cloth on them for a bit until they soften enough to come off. If you intend to strip the paint too, then don't worry about the decals, they'll come off with the paint.

-S
by Stingray
Tue Nov 15, 2005 10:59 am
Forum: Finishing
Topic: Future floor polish
Replies: 269
Views: 922101

Thanks, I'll look for that next time I'm in the hobby shop.

-S
by Stingray
Tue Nov 15, 2005 10:38 am
Forum: Finishing
Topic: Future floor polish
Replies: 269
Views: 922101

Is there something that can be added to Future to make it flat or at least matte? Th reason I ask is that someone recently mentioned in another thread something about giving a model a falt coat of Future.

-S
by Stingray
Mon Nov 14, 2005 4:50 pm
Forum: Finishing
Topic: What happened? (2 coats of same paint are different shades)
Replies: 5
Views: 5103

I suspect that the problem may be that since your first coat was not terribly heavy, it ended up being slightly translucent. This allows the color under to show through somewhat, effectively lightening the color. Your second coat, going on top of the first did not have this translucency, and so appe...
by Stingray
Fri Nov 11, 2005 4:42 pm
Forum: Construction
Topic: Need some snow help
Replies: 7
Views: 6565

what can he use as an adheasive that will either dry clear or white that won't react badly to 'baking soda' Diluted white glue?? Elmers and water. That's exactly what I've used for years to make snow, diluted white glue and baking soda. Looks great. Also works well for making pavement, but of cours...
by Stingray
Wed Nov 02, 2005 12:08 pm
Forum: Construction
Topic: My choice for glue
Replies: 11
Views: 12860

Stingray, if you're in OKC go out to Regal plastics on Reno near Morgan road. You can also buy styrene there in the 5 foot sheets, that'll last you awhile. That's where I got the glue and applicator bottles. Actually, I'm in the Tulsa area, but I've found a local plastics shop that sells styrene in...
by Stingray
Wed Nov 02, 2005 10:24 am
Forum: Finishing
Topic: Advanced. Decals
Replies: 210
Views: 667962

TER-OR wrote:http://www.spacemodelmania.com/models/w ... chlist.doc

There's my decal watchlist.
Interesting read. Thanks.

-S
by Stingray
Wed Nov 02, 2005 9:58 am
Forum: Finishing
Topic: What did I do wrong?(paint problem)
Replies: 13
Views: 11278

Gonzowerke wrote: I want instant gratification and can't have it!!!
That's the only part of this hobby that I don't like. When I'm really rolling, I hate to have to wait for paint to fully cure. That's why I usually have a couple kits going at once.

-S
by Stingray
Tue Nov 01, 2005 10:52 am
Forum: Construction
Topic: Wing Fuselage Construction Help
Replies: 7
Views: 5929

woozle wrote:... drill holes in the wings and through the body and put a coat hanger through it. .
Paper clips also work well if the parts are too small for coat hangers.

-S
by Stingray
Tue Nov 01, 2005 10:50 am
Forum: Construction
Topic: My choice for glue
Replies: 11
Views: 12860

I never see those syringes at generic hobby shops like Hobby Lobby. You have to get them at a shop that specializes in scale models.

-S
by Stingray
Tue Nov 01, 2005 9:34 am
Forum: Finishing
Topic: Best masking tape?
Replies: 10
Views: 8780

I use yellow 3M vinyl striping tape.

-S
by Stingray
Tue Nov 01, 2005 9:33 am
Forum: Finishing
Topic: What did I do wrong?(paint problem)
Replies: 13
Views: 11278

Is this resin or styrene? I always use commercial mold release remover on resin. Those kits always seem to have more or stronger mold release agents on them.

-S
by Stingray
Tue Oct 11, 2005 1:24 pm
Forum: Finishing
Topic: In general, do you leave ypur sci-fi models gloss-coated?
Replies: 8
Views: 7726

Generally speaking I'll dull down the finish either a little or a lot depending on the model.

-S
by Stingray
Tue Oct 11, 2005 11:43 am
Forum: Finishing
Topic: Advanced. Weathering. Pastels
Replies: 84
Views: 316145

Chalk pastels are available at Hobby Lobby as well.

-S