Search found 95 matches

by Zen-Builder
Thu Apr 08, 2010 12:36 am
Forum: Construction
Topic: how would you polish clear plastic?
Replies: 13
Views: 11643

Personally I would go with sandpaper to about 1500 than start using different grades of polishing compounds.

Slow route as it will take some time but results are worth it, IMO.

Maestro shows it in his Dunbine video in the "Plamo Tsukurou" series.

HTH.
by Zen-Builder
Mon Mar 01, 2010 10:55 am
Forum: Scratchbuilding
Topic: Superhero capes
Replies: 12
Views: 10108

Here is what I did for a few figures. I used real material that was soaked in a solution that my wife uses to prevent her quilt-work from fraying. The solution stiffened the material once it was shaped and held the shape. NOt sure what it was called, was a japanese product anyway. BUt similar should...
by Zen-Builder
Tue Feb 16, 2010 11:23 pm
Forum: Finishing
Topic: Paint booth sucking debris onto my finish....?
Replies: 16
Views: 18153

You need to clean your work-area well and keep the pets OUT.

I used to live with a cat that loved the spray-booth, She got booted out after I found cat-hair on a painted kit.

HTH.

P.S.: Also banish the carpet monster from your work-area.
by Zen-Builder
Mon Feb 01, 2010 6:41 pm
Forum: Hover Tank Challenge
Topic: Cabal Hover tank
Replies: 51
Views: 121447

Was thinking of kit-bashing my 2 TEchnopolice 21C tanks as they have cockpits, working hatches, figures, etc. But decided to build them OOTB instead. IMO, a hover-tank like ther gundam one is not really suited for this challenge but don't have the skills to scratchbuild anything aka "Centurion:...
by Zen-Builder
Wed Jan 13, 2010 9:34 pm
Forum: Hover Tank Challenge
Topic: Hover tank challenge
Replies: 143
Views: 555393

Can we use parts from Legged or wheeled tanks like Dougram, Technopolice 21C, etc?

Example: LIke a Bilzzard Gunner
http://www.mahq.net/mecha/dougram/dougram/f35c.jpg
by Zen-Builder
Tue Jan 12, 2010 4:52 am
Forum: Hover Tank Challenge
Topic: Hover tank challenge
Replies: 143
Views: 555393

REcalling the old Battlet4ch game, I think many of the tqanks solely used Energy weapons or guass weapons(none of which have recoil).

http://www.sarna.net/wiki/Main_Page

I think same held true for "Renegade Legion" which also had many hover-tanks.

HTH.
by Zen-Builder
Mon Jan 04, 2010 3:16 pm
Forum: Finishing
Topic: any good weather-resistant clear coats out there?
Replies: 7
Views: 6526

Finishers(Japan) sells a nice Urethane coat(with hardener) that can be Airbrushed.

HTH.
by Zen-Builder
Sun Jan 03, 2010 7:30 am
Forum: Lighting & Electronics
Topic: Need Lighting help(Maximillian Vlack Hole)
Replies: 0
Views: 8458

Need Lighting help(Maximillian Vlack Hole)

Hi All. I got a "Maximillian' kit from the Black Hole and would like to add lights into the Head. I know lightsheet would be the best(AFAIK), but I don't have access to it here. Any suggestions how I could give the clear part an even glow using LED's or similar. Electronics, batteries and switc...
by Zen-Builder
Sun Dec 27, 2009 6:08 am
Forum: Finishing
Topic: white primer VS flat white enamel help needed
Replies: 3
Views: 3029

Yeah, I often use white primer and skip the white paint afterwards.

Glossiness, etc comes from the top-coat anyway.
by Zen-Builder
Sun Nov 15, 2009 3:35 am
Forum: Finishing
Topic: Mr Mark Softer question.
Replies: 2
Views: 2659

I apply it soon after I pit the decal on and dabbed off the excess water.
Never had a prob and experienced very little curling.

HTH.

P.S.: Got a link to those instructions?
by Zen-Builder
Thu Oct 08, 2009 1:35 pm
Forum: Construction
Topic: Tool for cutting circles?
Replies: 6
Views: 4578

OLFA also makes a great circle cutter and can the extended to make some big circles.

HTH.
by Zen-Builder
Sun Jun 22, 2008 7:21 pm
Forum: Construction
Topic: not scifi but still need modeling help gluing clear plastic
Replies: 7
Views: 5723

If you want a clear box look at the stuff used to glue aquariums together.
Forum Silicone that dries clear.

For acrylic sheeting there is a similar glue available here.
by Zen-Builder
Thu May 29, 2008 9:02 pm
Forum: Finishing
Topic: Making a clear piece translucent?
Replies: 12
Views: 9258

IMO, even with frosting etc, you will still have a hot-spot from the LED.
How about EL-Sheeting?
by Zen-Builder
Wed May 14, 2008 3:40 pm
Forum: Construction
Topic: Need help removing >*really stuck*< screws.
Replies: 17
Views: 13909

I use 2 methods to remove stuck/worn screws. 1.) Impact screw-driver, bassically a must when working on Bikes/cars. 2.) You can also drill a hole in the screw and use a screw extractor set. Bassically another screw you insert into the worn screw but counter-threaded. So as you tighten it it will uns...
by Zen-Builder
Tue May 06, 2008 3:15 pm
Forum: Construction
Topic: Cleaned the surface but the primer won't stick.
Replies: 10
Views: 11933

Have you tried a self-etching Primer?

Sorry, can't recommend a brand as what I use will not be available where you are.
by Zen-Builder
Tue Apr 15, 2008 8:53 pm
Forum: Finishing
Topic: neglected airbrush cleaning
Replies: 15
Views: 7791

First I would start soaking it in a cleaning solution. Said that it depends on your o-rings/seals if they are teflon you can use laquer, etc. If the needle and nozzle still has paint residue I would start sanding those down and also use an airbrush cleaning kit. For hard to remove stuff I use a file...
by Zen-Builder
Wed Mar 12, 2008 12:39 am
Forum: Finishing
Topic: Airbrush maintenance
Replies: 12
Views: 11568

Agree, no need to tear it apart after each usage.
Joseph does the same steps I usually do.

If you use it often take it apart maybe once a week and do proper cleaning and needle lube job.
Lots of damaged needles, etc occur during the dis-assembly and assembly process.
by Zen-Builder
Sun Mar 09, 2008 6:14 pm
Forum: Finishing
Topic: Airbrush problem... quik help?
Replies: 11
Views: 5532

Depends, I had a similar compressor and mine tended to get very hot after running non-stop for 15 minutes.
by Zen-Builder
Sun Mar 02, 2008 8:03 pm
Forum: Finishing
Topic: Primers & Airbrushes
Replies: 13
Views: 10051

The Mr. Leveling thinner has the retarder already added in.

You can use standard Mr Thinner and add the Mr. Retarder Mild to get the same results.

HTH.
by Zen-Builder
Sun Feb 24, 2008 6:16 pm
Forum: Construction
Topic: Gloves
Replies: 6
Views: 3851

I get my Gloves from the local chemist.

Don't like the powdered ones as the powder sticks to your hands and makes them smelly especially when you sweat a bit.
Ones I tried were only dusted on the inside.
by Zen-Builder
Sat Feb 16, 2008 12:51 am
Forum: Finishing
Topic: Zimmerit paste
Replies: 4
Views: 4095

Had a look at the DVD, needed to go through my DVD collection of the TV-Series. The Putty he uses is an Epoxy putty, it needs to be mixed/kneaded. If you check the video a bit later you see it lying on the table(white centre, blue outer ring). Again it is not ready to be used out of the package(no t...
by Zen-Builder
Fri Feb 15, 2008 11:28 pm
Forum: Finishing
Topic: Zimmerit paste
Replies: 4
Views: 4095

Got a link to one of those pics?
by Zen-Builder
Fri Feb 15, 2008 7:09 pm
Forum: Finishing
Topic: Zimmerit paste
Replies: 4
Views: 4095

Hard to say, without having seen the Video. Lots of putties that come in tubes. [edit] What would be the purpose of Zimmerit on an 18m Robot. Doing the Zimmerit pattern in 1/35 is tough enough, doing one in 1/100 or 1/144. Not even sure what tool/putty you would use for those scales as in those scal...
by Zen-Builder
Tue Jan 29, 2008 10:27 pm
Forum: Finishing
Topic: evil dust bunnies
Replies: 6
Views: 5540

I use a dry-booth.

Once parts are painted they get put into the booth for drying.
It is sealed and cuts down on the curing time of paint, etc.
by Zen-Builder
Sun Jan 27, 2008 6:00 pm
Forum: Finishing
Topic: What's the difference between gravity fed and bottle feed AB
Replies: 5
Views: 4377

Siphon feed require a higher air-pressure to paint as the paint needs to be sucked out of the Bottle.

Both got their pros and cons. Siphon feed are good for applications where you need larger volumes of paints like big models.
by Zen-Builder
Thu Jan 17, 2008 7:08 pm
Forum: Finishing
Topic: Problem Printing Decals
Replies: 9
Views: 5129

Thomas E. Johnson wrote: I got the same results when I tried it on white decal paper to. :roll:
You sure you haven't got a RGB vs CYM problem there.

Those are 2 standards for color recognition on PC's/Printers, if your image is one format and the printer produces the other you might get that results.

HTH.
by Zen-Builder
Mon Dec 24, 2007 8:01 pm
Forum: Finishing
Topic: Simulating paint chips & streaks on a 1/144 Gunpla?
Replies: 3
Views: 2946

Yeah, it is appropriate.

But keep in mind that most of the wear and tear most likely will be lower down due to the size of the robot(18metres+).

IMO, the upper portions will show battle damage but less wear and tear.

HTH.
by Zen-Builder
Tue Oct 16, 2007 9:48 pm
Forum: Finishing
Topic: Tamiya Surface Primer roughly equal to Mr. Surfacer
Replies: 8
Views: 7067

Lt. Z0mBe wrote: Really? Any place where we could see equivalencies? For instance the Tamiya "XX" is the Iwata "YY."
Also interested in that info.
I know that most of the AB from the "Factory" can share spares.

A friend bought an olympus crown cap for his Iwata.
by Zen-Builder
Tue Oct 16, 2007 12:49 am
Forum: Finishing
Topic: Tamiya Surface Primer roughly equal to Mr. Surfacer
Replies: 8
Views: 7067

Tamiya's primer is re-badged Gunze Mr.Surfacer. Just like their airbrushes are re-badged Iwatas. WRONG, they simply come from the same factory and are packaged differently. The "Factory" in japan produces airbrushes and compressors for Tamiya, Iwata, Gunze, Wave, Olympus, Holstein, BB&...
by Zen-Builder
Tue Oct 02, 2007 8:26 pm
Forum: Finishing
Topic: Shake it up Baby Now!!!
Replies: 4
Views: 4409

I use the local version of the Badger Paint Stirrer.

http://www.hobbylinc.com/gr/bad/bad121.jpg