Search found 278 matches
- Tue Mar 12, 2024 7:15 pm
- Forum: Scratchbuilding
- Topic: Kool Shade
- Replies: 0
- Views: 262
Kool Shade
I know this is probably a dead end subject. Kool Shade has been off the market now for like 15 years and there's been no real replacements I am aware of. I think since 2008 or 2009? I know the pain of trying to buy the "real thing" is extremely costly. I think it's something like $1,000.00...
- Sat Dec 30, 2023 1:37 pm
- Forum: Finishing
- Topic: dumb painting question
- Replies: 2
- Views: 8196
Re: dumb painting question
I'm not so concerned about the toxicity of lacquer thinner, although I'm not looking to find something that is going to give me cancer after I use it. I know the stuff is bad to breath and a charcoal filter is necessary. I'm looking for something that will produce good finished results, so really mo...
- Thu Dec 28, 2023 6:16 pm
- Forum: Finishing
- Topic: dumb painting question
- Replies: 2
- Views: 8196
dumb painting question
Is there a difference between using your typical "off the hardware shelf" lacquer thinner to your maybe... "higher quality grade automotive lacquer thinner" for thinning out acrylic lacquers, or are they just one in the same? The only difference being that the automotive lacquer ...
- Wed Dec 06, 2023 5:13 pm
- Forum: Scratchbuilding
- Topic: 3d model building/printing services
- Replies: 2
- Views: 6741
Re: 3d model building/printing services
I haven't made it yet, but it will be a combination of kit bashed pieces to make the end result (various scale of kit parts used). So, its 100% custom. I'm a ways off from really getting started. I just was curious if it would be a crippling expense or not? I've no idea if some of the parts can be p...
- Wed Dec 06, 2023 5:03 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Re: Nail Polish...anyone ever use them for painting?
Pretty sure they strictly use acetone although I am not 100% on that. I had thought of that...but I'd like to get larger volumes of solvents. Like 1/2 to full gallons of MEK, Acrylic Lacquer thinner, Acetone. Mineral spirits etc.
- Mon Dec 04, 2023 5:19 pm
- Forum: Scratchbuilding
- Topic: 3d model building/printing services
- Replies: 2
- Views: 6741
3d model building/printing services
I'm not sure where this belongs, but I am not sure who else to pose this too? I've a fairly large project I'm wanting to take on and some of the parts I'm making (kit bashing together really) to make certain components may still be out of scale. Either a little too big or a little too small. It's al...
- Mon Nov 27, 2023 3:47 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Re: Nail Polish...anyone ever use them for painting?
Well, I'd be willing to pay someone to buy the solvents I want out of state and ground ship them to me, but I don;t know anyone in any neighboring states who would be willing to do that? And, UPS or some other outfit might not be willing to ship those items accross state lines and if they did, they ...
- Sun Nov 26, 2023 6:18 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Re: Nail Polish...anyone ever use them for painting?
The Hardware stores (Lowes&Home Depot.) have those solvents, but they have all been reformulated for CA as you know. How good they are I don't know? Like I said, it's all those reformulated "green" EPA approved solvents. Call me stubborn or set in my ways, but I prefer the NOS stuff. I...
- Sun Nov 26, 2023 4:06 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Re: Nail Polish...anyone ever use them for painting?
So, would using the nail polish cleaner be better than buying Acetone itself? I was under the impression that in CA (where I am) that you can't get real Acetone. You can only get that "green" EPA approved stuff. Not as I know/remember it? Maybe I've been wrong all this time? Also, wouldn't...
- Sun Nov 26, 2023 10:11 am
- Forum: Scratchbuilding
- Topic: removing electrolplate from parts
- Replies: 11
- Views: 38620
Re: removing electrolplate from parts
Brake fluid is super caustic. I know others who use it as a paint stripper. Never thought it would remove electroplating.
- Sat Nov 25, 2023 10:44 pm
- Forum: Scratchbuilding
- Topic: removing electrolplate from parts
- Replies: 11
- Views: 38620
Re: removing electrolplate from parts
Okay, so pass on the Reveal paint stripper? It's not like you get a lot of it anyway. It's maybe a 1oz. bottle? I should be able to find the Super Clean at Ace Hardware.
- Sat Nov 25, 2023 10:42 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Re: Nail Polish...anyone ever use them for painting?
Thanks, I thought of that but wanted to see if anyone knew in here or tried it? My biggest hurdle is getting solvents. I used up all my real lacquer thinner a long time ago, as well as the MEK, Acetone, and I have some M.M airbrush thinner, no mineral spirits because I can't get any of the real stuf...
- Sat Nov 25, 2023 7:07 pm
- Forum: Finishing
- Topic: Nail Polish...anyone ever use them for painting?
- Replies: 12
- Views: 58146
Nail Polish...anyone ever use them for painting?
So, I never really thought of using it and today I was. Nail polish. I know acrylics are the thing now, enamels are going the way of the dinosaur despite have loads of Flowquil R.R and military enamels, I have more or less run out of thinner Well, I have a very limited supply anyway and had been usi...
- Tue Nov 21, 2023 4:28 pm
- Forum: Scratchbuilding
- Topic: removing electrolplate from parts
- Replies: 11
- Views: 38620
Re: removing electrolplate from parts
Would the Revell paint stripper work just as good? Y/N?
- Sun Nov 19, 2023 5:44 pm
- Forum: Lighting & Electronics
- Topic: I suck at LEDs and electronics
- Replies: 2
- Views: 5941
Re: I suck at LEDs and electronics
Cool. Thank you.
- Sat Nov 18, 2023 5:37 pm
- Forum: Lighting & Electronics
- Topic: I suck at LEDs and electronics
- Replies: 2
- Views: 5941
I suck at LEDs and electronics
I was curious if anyone out there knows of any kind of manual or guide about wiring and installing LED's and other lighting effects? I am SO BAD at it its embarrassing. Learning to solder is one thing, wiring LEDs and using circuit boards is another.
- Sat Nov 18, 2023 5:09 pm
- Forum: Scratchbuilding
- Topic: removing electrolplate from parts
- Replies: 11
- Views: 38620
Re: removing electrolplate from parts
Really? And it doesn't mess up the plastic parts? I just have a bunch of chrome parts I wants to strip. I think it be better than just painting over the chrome I.M.O. Where can I find it? So far I'm not really getting any hits on who has it?
- Fri Nov 17, 2023 4:03 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Re: Not a lot of experience working with acrylics
Yeah, I know there are a few other brands out there that have "pearls or iridescent colors" but often not the right ones I'm looking for. They may have two or three, but not all of them. To date, Daler Rowney and Doc Martin's inks are the only ones that have anything close to what I need. ...
- Thu Nov 16, 2023 6:45 pm
- Forum: Scratchbuilding
- Topic: removing electrolplate from parts
- Replies: 11
- Views: 38620
removing electrolplate from parts
Anyone know how to strip the electroplated chrome off of kit parts? A long time ago I seem to remember reading that if you soak the parts in bleach that it strips the plating off. Is that the best way or is there another way?
- Thu Nov 16, 2023 6:39 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Re: Not a lot of experience working with acrylics
I inquired about some things on the Daler Rowney web site, again they told me you can't airbrush the iridescents. I wonder why they made the damn iridescent inks if they wouldn't make it so you could shoot it through a double action? Probably came down to cost. Finer, higher quality pigments probabl...
- Wed Nov 15, 2023 2:25 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Re: Not a lot of experience working with acrylics
6-8 inches distance? That's gonna be a lot of masking. Well, I was kinda expecting to anyway. It's just what it requires. I'm just kinda excited that the Daler Downey iridescent inks can be airbrushed because I gave up wanting to use those. One guy I sort of learned to airbrush from always worked re...
- Tue Nov 14, 2023 12:59 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Re: Not a lot of experience working with acrylics
Did you do that with a single action airbrush or were you shooting with a double action brush? How much PSI? Yeah, even the Daler Rowney bottles don't say you can airbrush those iridescent inks. Kinda misleading. Unless I'm going for an "opaque" color, I was going to goof around to see how...
- Sun Nov 12, 2023 8:56 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Re: Not a lot of experience working with acrylics
You were able to airbrush the Daler Rowny Iridescent inks? I was told you can't shoot those through an airbrush and that the pigments were too big and clog the nozzle and needle.
- Sun Nov 05, 2023 6:30 pm
- Forum: Finishing
- Topic: Not a lot of experience working with acrylics
- Replies: 11
- Views: 59534
Not a lot of experience working with acrylics
I don't have a lot of experience working with acrylics other than on water color paper. I'm also looking at using acrylics which are not marketed as "hobby/model finishing" paints like Tamiya. These are Doc Martin's acrylic inks which mainly can be purchased from online stores or ordered t...
- Mon Oct 30, 2023 4:07 pm
- Forum: Scratchbuilding
- Topic: Who collects stuff for scratch building?
- Replies: 402
- Views: 1026753
Re: Who collects stuff for scratch building?
I've a bunch of kit bashing parts. In fact, some I may give away. If anyone is interested?
- Sat Oct 28, 2023 5:47 pm
- Forum: Scratchbuilding
- Topic: free kit bashing part(s) 1/350 Tamiya WWII battleship Yamato
- Replies: 0
- Views: 51122
free kit bashing part(s) 1/350 Tamiya WWII battleship Yamato
Anyone interested in a 1/350 Tamiya WWII Battleship Yamato hull and upper deck? I bought out a started kit and the only parts I'm not terribly interested in using are the hull and the top deck. Its got a motor already installed in it too from the photo I have seen. I haven't received it yet, but if ...
- Mon Oct 16, 2023 4:34 pm
- Forum: Scratchbuilding
- Topic: Laser cutting service
- Replies: 33
- Views: 122760
Re: Laser cutting service
Well, that's close. Not down the street from me by not impossibly far away. I wonder what they charge of if it is comparable to TAP Plastics laser cutting service?
- Sun Oct 15, 2023 5:29 pm
- Forum: Scratchbuilding
- Topic: Laser cutting service
- Replies: 33
- Views: 122760
Re: Laser cutting service
I might be needing some laser cutting in the future to make masters for molds. Does anyone know what the working size/table is of this service? How big can he handle?
- Thu Jul 20, 2023 5:28 pm
- Forum: Scratchbuilding
- Topic: What's a dental vacuum former?
- Replies: 20
- Views: 74993
Re: What's a dental vacuum former?
I have that book. Read it from cover to cover. I know a tank is the best way to create the 29hg's of vacuum. You just need to make sure you have the right sized tank to do the job and there are other little tricks to reduce air volume. Basically, if I know I need to evacuate 4 cubic feet of air volu...
- Mon Jul 17, 2023 4:24 pm
- Forum: Scratchbuilding
- Topic: What's a dental vacuum former?
- Replies: 20
- Views: 74993
Re: What's a dental vacuum former?
Good reference to have. I've always wanted build my own vacuforming machine. Part of the problem is space for the size I'd like to have and getting a pump that won't bankrupt me. A vacuum motor only gets you so far, you just don't get the "pull" that a vacuum pump provides or the pull down...